Tuesday, February 3, 2009

Kesehatan Jiwa Menjadi Prioritas Global di Indonesia

Kesehatan jiwa saat ini telah menjadi masalah kesehatan global bagi setiap negara, dimana proses globalisasi dan pesatnya kemajuan teknologi informasi memberi dampak terhadap nilai-nilai sosial dan budaya masyarakat. Sementara tidak semua orang mempunyai kemampuan yang sama untuk menyesuaikan dengan berbagai perubahan tersebut. Sayangnya, banyak orang yang tidak menyadari jika mereka mungkin mengalami masalah kesehatan jiwa. Kesehatan Jiwa Menjadi Prioritas Global di Indonesia


16 Oct 2008
Kesehatan jiwa saat ini telah menjadi masalah kesehatan global bagi setiap negara, dimana proses globalisasi dan pesatnya kemajuan teknologi informasi memberi dampak terhadap nilai-nilai sosial dan budaya masyarakat. Sementara tidak semua orang mempunyai kemampuan yang sama untuk menyesuaikan dengan berbagai perubahan tersebut. Sayangnya, banyak orang yang tidak menyadari jika mereka mungkin mengalami masalah kesehatan jiwa.
Demikian disampaikan Sekretaris Jenderal Departemen Kesehatan RI, dr. H. Syafii Ahmad, MPH saat membuka seminar sehari dalam rangka Peringatan Hari Kesehatan Jiwa Sedunia (HKJS) Tahun 2008 di kantor Depkes, hari ini. HKJS diperingati setiap tanggal 10 Oktober, tahun ini merupakan peringatan ke-15 sejak tahun 1993. Hadir dalam acara ini para Pejabat Eselon I, II di lingkup Depkes RI, Perwakilan WHO Indonesia, LSM, pejabat lintas sektor, tokoh masyarakat, anggota Dharma Wanita, dan PKK.
Lebih lanjut dikatakan dr. Sjafii Ahmad, masalah kesehatan jiwa sangat mempengaruhi produktifitas dan kualitas kesehatan perorangan maupun masyarakat yang tidak mungkin ditanggulangi oleh sektor kesehatan saja. Mutu SDM tidak dapat diperbaiki hanya dengan pemberian gizi seimbang namun juga perlu memperhatikan 3 aspek dasar yaitu fisik/jasmani (organo biologis), mental-emosional/jiwa (psikoedukatif), dan sosial-budaya/lingkungan (sosiokultural).
Gangguan jiwa walaupun tidak langsung menyebabkan kematian, namun akan menimbulkan penderitaan yang mendalam bagi individu dan beban berat bagi keluarga, baik mental maupun materi karena penderita menjadi kronis dan tidak lagi produktif.
Ganguan kesehatan jiwa, bukan hanya “psikotik” saja tetapi sangat luas mulai yang sangat ringan yang tidak memerlukan perawatan khusus seperti kecemasan dan depresi, ketagihan NAPZA, alkohol rokok, kepikunan pada orang tua, sampai kepada yang sangat berat seperti skizophrenia.
Hasil survey kesehatan mental rumah tangga (SKMRT) tahun 1995 menunjukkan adanya gejala gangguan kesehatan jiwa pada penduduk rumah tangga dewasa di Indonesia yaitu 185 kasus per 1.000 penduduk. Hasil SKMRT juga menyebutkan, gangguan mental emosional pada usia 15 tahun ke atas mencapai 140 kasus per 1.000 penduduk, sementara pada rentang usia 5 - 14 tahun ditemukan 104 kasus per 1.000 penduduk.
Kesehatan jiwa saat ini telah menjadi masalah kesehatan global bagi setiap negara termasuk di Indonesia, dimana proses globalisasi dan pesatnya kemajuan teknologi informasi memberikan dampak terhadap nilai-nilai sosial dan budaya pada masyrakat. Sementara tidak semua orang mempunyai kemampuan yang sama untuk menyesuaikan dengan berbagai perubahan tersebut.
Kejadian-kejadian tersebut seluruhnya dilatarbelakangi oleh aspek-aspek kejiwaan seperti agresifitas, emosi yang tidak terkendali, ketidakmatangan kepribadian, depresi karena tekanan kehidupan, tingkat kecurigaan yang meningkat, dan persaingan yang tidak sehat.
Masalah-masalah gangguan kesehatan jiwa ini akan dibahas dalam seminar sehari. Menurut Ketua Panitia Seminar HKJS yang juga Direktur Bina Pelayanan Medik Jiwa, dr. H. M. Aminullah, Sp.KJ, MM, pertemuan ini betujuan untuk meningkatkan pemahaman peserta terhadap kesehatan jiwa yang ada di masyarakat.
Berkaitan dengan tema peringatan HKJS tahun 2008 Making Mental Health Global Priority: Scaling up Services Trough Citizen Advocacy and Action (Menjadikan Kesehatan Jiwa Melalui Advokasi dan Aksi Masyarakat), pada kesempatan tersebut, materi yang akan dibahas dalam seminar sehari ini adalah Kesehatan Jiwa di Indonesia Kemarin, Sekarang dan Akan Datang oleh dr. Albert Maramis, Sp. KJ., Kejenuhan dalam Bekerja Menurunkan Produktivitas oleh DR. dr. Fahmi Idris, M.Kes dan Kekerasan terhadap Perempuan dan Anak oleh Yenni Rosa Damayanti.
Selain seminar, Departemen Kesehatan juga melakukan berbagai kegiatan dalam peringatan HKJS, diantaranya penyebaran brosur tentang kesehatan jiwa dan gangguan jiwa yang mencakup sebab dan penanggulangannya, pameran, pemeriksaaan gratis berupa pemeriksaan derajat stress oleh Tim RS. Dr. Soeharto Herdjan, pemeriksaan gula darah dan kolesterol bekerjasama dengan Direktorat Penyakit Tidak Menular (PTM) dan RS. Marzoeki Mahdi Bogor, serta talk show di salah satu stasiun televisi.
Sementara itu, puncak peringatan HKJS akan dilaksanakan di Kantor Walikota Bogor tanggal 20 Oktober 2008, dengan mengangkat sub tema “Melalui Kesehatan Jiwa Kita Sehatkan Masyarakat Desa”.
Berita ini disiarkan oleh Pusat Komunikasi Publik, Sekretariat Jenderal Departemen Kesehatan. Untuk informasi lebih lanjut dapat menghubungi melalui nomor telepon/faks: 021-5223002 dan 52960661, atau alamat e-mail puskom.publik@yahoo.co.id


Penatalaksanaan Fase akut
Cedera Kepala
Dr. Budi Riyanto W.
UPF Mental Organik, Rumah Saki' Jiwa Bogor, Bogor
PENDAHULUAN
Cedera kepala merupakan salah satu kasus yang paling
sering dijumpai di ruang gawat darurat rumah sakit. Suatu
rumah sakit yang melayani daerah yang berpenduduk sekitar
250.000 orang bisa menerima sampai 5.000 kasus cedera ke-
pala tiap tahun, ini merupakan 10% dari semua kasus yang
datang.
Kasus cedera kepala yang dirawat di bangsal saraf RS Cipto
Mangunkusumo selama tahun 19811982 adalah sebesar 1850
orang, 1642 orang (88,75%) di antaranya adalah akibat kecela-
kaan lalu lintas. Sedangkan kasus cedera kepala yang ke unit
gawat darurat RS Cipto Mangunkusumo pada tahun 1982 ada-
lah 4146 orang, 4056 dewasa dan 90 anak-anak. Di antara 1642
kasus yang dirawat tersebut 137 meninggal dunia.
Dengan makin banyaknya kendaraan di jalan-jalan dan
meningkatnya mobilitas penduduk, maka kasus cedera kepala
terutama akibat kecelakaan lalu lintas akan makin bertambah
pula. Di Amerilca pada tahun 1970 kecelakaan lalu-lintas telah
menduduki tempat keempat sebagai penyebab kematian yang
utama, bahkan nomor satu pada golongan usia 0-40 tahun.
Kasus cedera kepala mempunyai beberapa aspek khusus,
antara lain kemampuan regenerasi sel otak yang amat terbatas,
kemungkinan komplikasi yang mengancam jiwa atau menye-
babkan kecacatan, juga karena terutama mengenai pria dalam
usia produktif yang biasanya merupakan kepala keluarga.
DIAGNOSIS
A. Anamnesis
Diagnosis cedera kepala biasanya tidak sulit ditegakkan :
riwayat kecelakaan lalu lintas, kecelakaan kerja atau perkelahi-
an hampir selalu ditemukan. Pada orang tua dengan kecelakaan
yang terjadi di rumah, misalnya jatuh dari tangga, jatuh di kamar
mandi atau sehabis bangun tidur, harus dipikirkan kemungkinan
gangguan pembuluh darah otak (stroke) karena keluarga kadang-
kadang tak mengetahui pasti urutan kejadiannya : jatuh ke-
mudian tidak sadar atau kehilangan kesadaran lebih dahulu
sebelum jatuh.
Anamnesis yang lebih terperinci meliputi :
1.
Sifat kecelakaan.
2.
Saat terjadinya, beberapa jam/hari sebelum dibawa ke rumah
sakit.
3.
Ada tidaknya benturan kepala langsung.
4.
Keadaan penderita saat kecelakaan dan perubahan kesadaran
sampai saat diperiksa.
Bila si pasien dapat diajak berbicara, tanyakan urutan peris--
tiwanya sejak sebelum terjadinya kecelakaan, sampai saat tiba
di rumah sakit untuk mengetahui kemungkinan adanya amnesia
retrograd. Muntah dapat disebabkan oleh tingginya tekanan
intrakranial. Pasien tidak selalu dalam keadaan pingsan (hilang/
turun kesadarannya), tapi dapat kelihatan bingung/disorientasi
(kesadaran berubah).
B. Indikasi Perawatan
Pasien sebaiknya dirawat di rumah sakit bila terdapat gejala
atau tanda sebagai berikut :
1.
Perubahan kesadaran saat diperiksa.
2.
Fraktur tulang tengkorak.
3.
Terdapat defisit neurologik.
4.
Kesulitan menilai kesadaran pasien, misalnya pada anak-
anak, riwayat minum alkohol, pasien tidak kooperatif.
5.
Adanya faktor sosial seperti :
a.
Kurangnyapengawasan orang tua/keluarga bila dipulangkan.
b.
Kurangnya pendidikan orang tua/keluarga.
c.
Sulitnya transportasi ke rumah sakit.
Pasien yang diperbolehkan pulang hanis dipesan agar segera
Cermin Dunia Kedokteran No. 77, 1992
52

kembali ke rumah sakit bila timbul gejala sebagai berikut :
1.
Mengantuk, sulit dibangunkan.
2.
Disorientasi, kacau.
3.
Nyeri kepala yang hebat, muntah, demam.
4.
Rasa lemah, kelumpuhan, penglihatan kabur.
5.
Kejang, pingsan.
6.
Keluar darah/cairan dari hidung, telinga.
PENATALAKSANAAN
A. Pemeriksaan fisik
Hal terpenting yang pertama kali dinilai ialah status fungsi
vital dan status kesadaran pasien. Ini tiaras dilakukan sesegera
mungkin bahkan mendahului anamnesis yang teliti.
1. Status fungsi vital
Seperti halnya dengan kasus kedaruratan lainnya, hal ter-
penting yang dinilai ialah :
a.
Jalan nafas airway
b.
Pernafasan breathing
c.
Nadi clan tekanan darah cireulation
Jalan nafas harus segera dibersihkan dari benda asing, lendir
atau darah, bila perlu segera dipasang pipa naso/orofaring;
diikuti dengan pemberian oksigen. Manipulasi leher hams ber-
hati-hati bila ada riwayat/dugaan trauma servikal (whiplash
injury), jamb dengan kepala di bawah atau trauma tengkuk.
Gangguan yang mungkin ditemukan dapat berupa :
a.
Pernafasan Cheyne Stokes.
b.
Pernafasan Biot/hiperventilasi.
c.
Pernafasan ataksik.
yang menggambarkan makin memburuknya tingkat kesadaran.
Pemantauan fungsi sirkulasi dilakukan untuk menduga
adanya shock, terutama bila terdapat juga trauma di tempat lain,
misalnya trauma thorax, trauma abdomen, fraktur ekstremitas.
Selain itu peninggian tekanan darah yang disertai dengan me-
lambatnya frekuensi nadi dapat merupakan gejala awal peninggi-
an tekanan intrakranial, yang biasanya dalam fase akut dise-
babkan oleh hematoma epidural.
2. Status kesadaran
Dewasa ini penilaian status kesadaran secara kualitatif, ter-
utama pada kasus cedera kepala sudah mulai ditinggalkan karena
subyektivitas pemeriksa; istilah apatik, somnolen, sopor, coma,
sebaiknya dihindari atau disertai dengan penilaian kesadaran
yang lebih obyektif, terutama dalam keadaan yang memerlukan
penilaian/perbandingan secara ketat. Cara penilaian kesadaran
yang luas digunakan ialah dengan Skala Koma Glasgow; cara
ini sederhana tanpa memerlukan alat diagnostik sehingga dapat
digunakan balk oleh dokter maupun perawat. Melalui cara ini
pula, perkembangan/perubahan kesadaran dari waktu ke waktu
dapat diikuti secara akurat (Gambar 1).
Skala Koma Glasgow (Tabel 1)
Skala Koma Glasgow adalah berdasarkan penilaian/pe-
meriksaan atas tiga parameter, yaitu :
a.
Buka mata.
b.
Respon motorik terbaik.
c.
Respon verbal terbaik.
Gambar 1. Crank Skala Koma Glasgow
Tabel 1. Skala Koma Glasgow
3. Status Neurologik Lain
Selain status kesadaran di atas pemeriksaan neurologik pada
kasus trauma kapitis terutama ditujukan untuk mendeteksi adanya
tanda-tanda fokal yang dapat menunjukkan adanya kelainan
fokal, dalam hal ini perdarahan intrakranial.
Tanda fokal tersebut ialah :
a.
Anisokori.
b.
Paresis/parahisis.
c.
Reties patologik sesisi.
4. Hal-hal Lain
Cermin Dunia Kedokteran No. 77, 1992 53

Selain cedera kepala, hams diperhatikan adanya kemung-
kinan cedera di tempat lain; trauma thorax, trauma abdomen,
fraktur iga atau tulang anggota gerak harus selalu dipikirkan
dan dideteksi secepat mungkin.
B. Pemeriksaan Tambahan
Peranan foto R6 tengkorak banyak diperdebatkan man-
faatnya, meskipun beberapa rumah sakit melakukannya secara
rutin. Selain indikasi medik, foto R6 tengkorak dapat dilakukan
atas dasar indikasi legal/hukum.
Foto RĂ´ tengkorak biasa (AP dan Lateral) umumnya dilakukan
pada keadaan :

Defisit neurologik fokal.

Liquorrhoe.

Dugaan trauma tembus/fraktur impresi.

Hematoma luas di daerah kepala.
Pada keadaan tertentu diperlukan proyeksi khusus, seperti proyeksi
tangensial pada dugaan fraktur impresi, proyeksi basis path
dugaan fraktur basis dan proyeksi khusus lain pada dugaan
fraktur tulang wajah. Perdarahan intrakranial dapat dideteksi
melalui pemeriksaan arterografi karotis atau CT Sean kepala
yang lebih disukai, karena prosedurnya lebih sederhana dan
tidak invasif, dan hasilnya lebih akurat. Meskipun demikian
pemeriksaan ini tidak dapat dilakukan di setiap rumah sakit.
Selain indikasi tersebut di atas, CT Sean kepala dapat dilakukan
pada keadaan :

perburukan kesadaran.

dugaan fraktur basis cranii.

kejang.
PENGOBATAN
1. Memperbaiki/mempertahankan fungsi vital
Usahakan agar jalan nafas selalu babas, bersihkan lendir dan
darah yang dapat menghalangi aliran udara pemafasan. Bila
perlu dipasang pipa naso/orofaringeal dan pemberian oksigen.
Infus dipasang terutama untuk membuka jalur intravena : guna-
kan cairan NaC10,9% atau Dextrose in saline.
2. Mengurangi edema otak
Beberapa cara dapat dicoba untuk mengurangi edema otak:
a.
Hiperventilasi.
b.
Cairan hiperosmoler.
c.
Kortikosteroid.
d.
Barbiturat.
a.
Hiperventilasi
Bertujuan untuk menurunkan peO
2
darah sehingga men-
cegah vasodilatasi pembuluh darah. Selain itu suplai oksigen
yang terjaga dapat membantu menekan metabolisme anaerob,
sehingga dapat mengurangi kemungkinan asidosis. Bila dapat
diperiksa, paO
2
dipertahankan > 100 mmHg dan paCO
2
di antara
2530 mmHg.
b.
Cairan hiperosmoler
Umumnya digunakan cairan Manitol 1015% per infus
untuk "menarik" air dari ruang intersel ke dalam ruang intra-
vaskular untuk kemudian dikeluarkan melalui diuresis. Untuk
memperoleh efek yang dikehendaki, manitol hams diberikan
dalam dosis yang cukup dalam waktu singkat, umumnya
diberikan : 0,51 gram/kg BB dalam 1030 menit.
Cara ini berguna pada kasus-kasus yang menunggu tindak-
an bedah. Pada kasus biasa, harus dipikirkan kemungkinan efek
rebound; mungkin dapat dicoba diberikan kembali (diulang)
setelah beberapa jam atau keesokan harinya.
c.
Kortikosteroid
Penggunaan kortikosteroid telah diperdebatkan manfaat-
nya sejak beberapa waktu yang lalu. Pendapat akhir-akhir ini
cenderung menyatakan bahwa kortikosteroid tidak/kurang ber-
manfaat pada kasus cedera kepala. Penggunaannya berdasarkan
pada asumsi bahwa obat ini menstabilkan sawar darah otak.
Dosis parenteral yang pernah dicoba juga bervariasi :
Dexametason pernah dicoba dengan dosis sampai 100 mg bolus
yang diikuti dengan 4 dd 4 mg. Selain itu juga Metilprednisolon
pernah digunakan dengan dosis 6 dd 15 mg dan Triamsinolon
dengan dosis 6 dd 10 mg.
d.
Barbiturat
Digunakan untuk mem"bius" pasien sehingga metabolisme
otak dapat ditekan serendah mungkin, akibatnya kebutuhan
oksigen juga akan menurun; karena kebutuhan yang rendah,
otak relatif lebih terlindung dari kemungkinan kemsakan akibat
hipoksi, walaupun suplai oksigen berkurang.
Cara ini hanya dapat digunakan dengan pengawasan yang
ketat.
e.
Cara lain
Pala 2448 jam pertama, pemberian cairan dibatasi sampai
15002000 ml/24 jam agar tidak memperberat edema jaringan.
Ada laporan yang menyatakan bahwa posisi tidur dengan
kepala (dan leher) yang diangkat 30° akan menurunkan tekanan
intrakranial.
Posisi tidur yang dianjurkan, terutama pada pasien yang
berbaring lama, ialah :

kepala dan leher diangkat 30°.

sendi lutut diganjal, membentuk sudut 150°.

telapak kaki diganjal, membentuk sudut 90° dengan tungkai
bawah
(Gambar 2).
Gambar 2. PosisI tidur yang dianjurkan
3. Obat-obat Nootropik
Dewasa ini banyak obat yang dikatakan dapat membantu
mengatasi kesulitan/gangguan metabolisme otak, termasuk
pada keadaan koma.
a. Piritinol
Piritinol merupakan senyawa mirip piridoksin (vitamin B
6
)
yang dikatakan mengaktivasi metabolisme otak dan memper-
Cermin Dunia Kedokteran No. 77, 1992
54

baiki struktur serta fungsi membran sel.
Pada fase akut diberikan dalam dosis 800-4000 mg/hari
lewat infus. Tidak dianjurkan pemberian intravena karena sifat-
nya asam sehingga mengiritasi vena.
b.
Piracetam
Piracetam merupakan senyawa mirip GABA - suatu neuro-
transmitter penting di otak. Diberikan dalam dosis 4-12 gram/
hari intravena.
c.
Citicholine
Disebut sebagai koenzim pembentukan lecithin di otak.
Lecithin sendiri diperlukan untuk sintesis membran sel dan
neurotransmitter di dalam otak. Diberikan dalam dosis 10Q-
500 mg/hari intravena.
4. Hal-hal lain
Perawatan luka dan pencegahan dekubitus harus mulai di-
perhatikan sejak dini; tidak jarang pasien trauma kepala juga
menderita luka lecet/luka robek di bagian tubuh lainnya. Anti-
biotika diberikan bila terdapat luka terbuka yang luas, trauma
tembus kepala, fraktur tengkorak yang antara lain dapat me-
nyebabkan liquorrhoe. Luka lecet dan jahitan kulit hanya
memerlukan perawatan lokal.
Hemostatik tidak digunakan secara rutin; pasien trauma
kepala umumnya sehat dengan fungsi pembekuan normal. Per-
darahan intrakranial tidak bisa diatasi hanya dengan hemostatik.
Antikonvulsan diberikan bila pasien mengalami kejang,
atau pada trauma tembus kepala dan fraktur impresi; preparat
parenteral yang ada ialah fenitoin, dapat diberikan dengan dosis
awa1250 mg intravena dalam waktu 10 menit diikuti dengan
250-500 mg fenitoin per infus selama 4 jam. Setelah itu diberi-
kan 3 dd 100 mg/hari per oral atau intravena. Diazepam 10 mg iv
diberikan bila terjadi kejang. Phenobarbital tidak dianjurkan ka-
rena efek sampingnya berupa penurunan kesadaran dan depresi
pernapasan.
PENUTUP
Cedera kepala merupakan masalah kesehatan yang akan
makin bertambah besar. Penanganan fase akut yang tepat dapat
memperbesar kemungkinan hidup pasien dan mencegah ke-
cacadan di kemudian hari. Di samping penanganan dan peng-
awasan fungsi vital, pemantauan tingkat kesadaran dan
kemungkinan komplikasi lainnya amat penting. Pengobatan
terutama ditujukan untuk mengurangi edema otak dan
mencegah komplikasi yang mungkin terjadi.
KEPUSTAKAAN
1.
Bullock R, Teasdale G. Head Injuries I. BMJ 1990; 300: 15158.
2.
Bullock R, Teasdale G. Head Injuries II. BMJ 1990; 300: 1576-9.
3.
Encephabol. monograf, Merek. 1986.
4.
Jennet B, Teasdale G. Management of Head Injuries. Philadelphia : FA
Davis Co. 1981.
5.
Marti Mardiono dkk. Penanggulangan akut penderita dengan cedera ke-
pala. Dalam : Berbagai aspek ceders kepala akibat kecelakaan lalu-lintas.
Andradi S., Wahyadi D., Soetarto PD. (eds), 1983. Hal: 47-66.
6.
Nedergaard M. Mechanism of brain damage in focal cerebral isehemia
Acta Neurol Seand (Feb) 1988; 77(2): 81101.
7.
Nicholin. monograf, 1984.
8.
Nootropil. monograf, UCB. 1980.
9.
Price DI. Head Injuries. Dalam : Care of the Critically Ill Patient. Tinker.
J, Rapin. M (eds). Berlin, Heidelberg, New York : Springer Verlag. 1983.
10.
Soemargo S, Harahap RP. Beberapa data Epidemologik Klinik penderita
cedera kepala di Bagian Saraf RSEM. Dalam : Berbagai aspek ceders
kepala akibat kecelakaan lalu lintas. Andradi S., Wahyadi D., Soetarto PD
(eds) 1983. hal 16-46.
If you master the difficult, you will be asked to perform the
Impossible
Cermin Dunia Kedokteran No. 77, 1992 55

Gait Analysis
Is the study of a persons style of walking. This includes descriptive and quantitive analysis of measurable parameters and clinical interpretation.

Gait Analysis - Simplified!


Basic anatomical terms
The anatomical terms describing the relationships between different parts of the body are based on the anatomical position in which a person is standing upright, with the feet together and the arms by the sides of the body, with the palms forward. This position, together with the reference planes are the terms describing relationships between different parts of the body.
Six terms are used to describe directions, with relations to the centre of the body. These are:
• anterior
• posterior
• superior
• inferior
• left
• right
Within a single part of the body additional terms are used to describe relationships:
• Medial means towards the midline of the body: the big toe is on the medial side of the foot.
• Lateral means away from the midline of the body: the little toe is on the lateral side of the foot.
• Proximal means towards the rest of the body: the hip is the proximal part of the lower limb.
• Distal means away from the rest of the body: the toes are the distal part of the foot.
• Superficial structures are close to the surface.
• Deep structures are far from the surface.
The motion of the limbs is described using reference planes:
1. A sagittal plane is any plane which divides part of the body into right and left portions; the median plane is the midline sagittal plane, which divides the whole body into right and left halves.
2. A frontal or coronal plane longitudinally divides a body part.
3. A transverse plane divides a body part into upper and lower portions.
Most joints can only move in one or two of these three planes. The possible movements are:
1. Flexion and extension take place in the sagittal plane; in the ankle these movements are called dorsiflexion and plantarflexion, respectively.
2. Abduction and adduction take place in the transverse plane.
3. Inversion and Eversion take place in the frontal plane.
Other terms which are also used to describe the motions of the joints or body segments;
1. Varus and valgus, which describe and angulation of a joint towards and away from the midline, respectively; knock knees are in valgus, bow legs are in varus.
2. Inversion of the feet brings the soles together; eversion causes the soles to point away from the midline.
3. Pronation and supination, are triplaner rotations.
Terminology in the foot can be confusing. The term pronation is used for a combined movement, which consists primarily of eversion but also includes some dorsiflexion and forefoot abduction. Similarly, supination is primarily inversion, but also includes some plantarflexion and forefoot, adduction relative to the hindfoot.
Bones
Almost every bone in the body takes part in walking and running.
The pelvis is formed from the sacrum, the coccyx and the two innominate bones. The sacrum consists of the five sacral vertebrae, fused together. The coccyx is the vestigial 'tail', made of three to five rudimentary vertebrae.
The innominate bone on each side is formed by the fusion of three bones - the ilium, ischium and pubis. The only real movement between the bones of the pelvis occurs at the sacroiliac joint, and this movement is generally very small. It is thus reasonable, for the purpose of gait analysis, to regard the pelvis as being a single rigid structure. The superior surface of the sacrum articulates with the fifth lumbar vertebra of the spine. On each side of the lower part of the pelvis is the acetabulum, which is the proximal part of the hip joint.
The femur is the longest bone in the body. The spherical femoral head articulates with the pelvic acetabulum to form the hip joint. The neck of the femur runs downwards and laterally from the femoral head to meet the shaft of the bone, which continues downwards to the knee joint. At the junction of the neck and the shaft are two bony protuberances, where a number of muscles are inserted - the greater trochanter laterally, which can be felt beneath the skin, and the lesser torchanter medially. The bone widens at its lower end to form the medial and lateral condyles. These form the proximal part of the knee joint and have a groove between them anteriorly which articulates with the patella.
The patella or kneecap is a sesamoid bone. That is to say, it is embedded within a tendon - in this case the massive quadriceps tendon, which beyond the patella is known as the patella tendon. The anterior surface of the patella is subcutaneous (immediately below the skin); its posterior surface articulates with the anterior surface of the lower end of the femur to form the patellofemoral joint. It has an important mechanical function which is to displace the quadriceps tendon forwards and thereby to improve its leverage.
The tibia extends from the knee joint to the ankle joint. Its upper end is broadened into medial and lateral condyles with an almost flat upper surface which articulates with the femur. The tibial tubercle is a small bony prominence on the front of the tibia, when the patella tendon is inserted. The anterior surface of the tibia is subcutaneous. The lower end of the tibia forms the upper and medial surfaces of the ankle joint with a subcutaneous medial projection called the medial malleolus.
The fibula is next to the tibia on its lateral side. For most of its length it is a fairly slim bone although it is broadened at both ends, the upper end being known as the head. The broadened lower end forms the lateral part of the ankle joint with a subcutaneous lateral projection known as the lateral malleolus. The tibia and fibula are in contact with each other at their upper and lower ends, as the tibiofibula joints. Movements at these joints are very small. A layer of fibrous tissue known as the interosseous membrane is between the bones.
The foot is a very complicated structure which is best thought of as being in three parts:
1. The rearfoot or hindfoot, which consists of two bones, one on tope of the other.
2. The midfoot, which consists of five bones, packed closely together.
3. The forefoot, which consists of the five metatarsals and the toes.
The talus (or astragalus) is the upper of the two bones in the rearfoot. Its superior surface forms the ankle joint, articulating above and medially with the tibia, and laterally with the fibula. Below, the talus articulates with the calcaneus through the subtalar joint. It articulates anteriorly with the most medial and superior of the midfoot bones - the navicular.
The calcaneus or os calcis lies below the talus and articulates with it through the subtalar joint. Its lower surface transmits the body weight to the ground through a thick layer of fat, fibrous tissue and skin. The anterior surface articulates with the most lateral and inferior of the midfoot bones - the cuboid.
The midfoot consists on five bones:
1. The navicular, which is medial and superior.
2. The cuboid, which is lateral and inferior.
3. Three cuneiform bones (medial, intermediate and lateral), which are in a row distal to the navicular.
The forefoot consists of the following:
The five metatarsals lie roughly parallel to each other, the lateral two articulating with the cuboid, and the medial three with the three cuneiform bones. The phalanges are the bones of the toes; there are two in the big toe and three in each of the other toes. The big toe is also called the great toe or hallux.






RENCANA PEMBANGUNAN KESEHATAN MENUJU INDONESIA SEHAT 2010
Tujuan nasional bangsa Indonesia seperti yang termaktuf dalam Pembukaan Undang-Undang Dasar 1945, adalah untuk melindungi segenap Bangsa Indonesia dan seluruh tumpah darah Indonesia dan memajukan kesejahteraan umum, mencerdaskan kehidupan bangsa, dan ikut melaksanakan ketertiban dunia yang berdasarkan kemerdekaan, perdamaian abadi dan keadilan sosial.
Untuk mewujudkan tujuan nasional tersebut diselenggarakan pembangunan nasional secara berencana, meyeluruh, terpadu, terarah, dan berkesinambungan. Adapun tujuan pembangunan nasional adalah untuk mewujudkam masyarakat adil dan makmur berdasarkan Pancasila dan UUD 1945 di dalam wadah Negara Kesatuan Republik Indonesia yang merdeka, berdaulat, bersatu, dan berkedaulatan rakyat dalam suasana perikehidupan bangsa yang aman, tenteram, tertib dan dinamis serta dalam lingkungan pergaulan dunia yang merdeka, bersahabat, tertib dan damai.
Untuk tercapainya tujuan pembangunan nasional tersebut dibutuhkan antara lain tersedianya sumber daya manusia yang tangguh, mandiri serta berkualitas. Data UNDP tahun 1997 mencatat bahwa Indeks Pembangunan Manusia di Indonesia masih menempati urutan ke 106 dari 176 negara. Tingkat pendidikan, pendapatan serta kesehatan penduduk Indonesia memang belum memuaskan.
Menyadari bahwa tercapainya tujuan pembangunan nasional merupakan kehendak dari seluruh rakyat Indonesia, dan dalam rangka menghadapi makin ketatnya persaingan bebas pada era globalisasi, upaya peningkatan kualitas sumber daya manusia harus dilakukan. Dalam hal ini peranan keberhasilan pembangunan kesehatan sangat menentukan. Penduduk yang sehat bukan saja akan menunjang keberhasilan program pendidikan, tetapi jiga mendorong peningkatan produktivitas dan pendapatan penduduk.
Untuk mempercepat keberhasilan pembangunan kesehatan tersebut diperlukan kebijakan pembangunan kesehatan yang lebih dinamis dan proaktif dengan melibatkan semua sektor terkait, pemerintah, swasta dan masayarakat. Keberhasilan pembangunan kesehatan tidak hanya ditentukan oleh kinerja sektor kesehatan semata, melainkan sangat dipengaruhi olehinteraksi yang dinamis dari pelbagai sektor. Upaya untuk menjadikan pembangunan nasional berwawasan kesehatan sebagai salah satu misi serta strategi yang baru harus dapat dijadikan komitmen semua pihak, disamping menggeser paradigma pembangunan kesehatan yang lama menjadi Paradigma Sehat.
Penyusunan rencana pembangunan kesehatan menuju Indonesia Sehat 2010 ini adalah manifestasi konkrit dari kehendak untuk melaksanakan pembangunan nasional berwawasan kesehatan dan paradigma sehat tersebut.

Gait Analysis
Gait analysis offers a unique means to measure the mechanical factors of joint loading, orientation, and neuromuscular function during activities of daily living such as walking. The core technology for this analysis is the motion capture system. In the figure to the right, optoelectronic cameras are used to measure the three-dimensional location of targets fastened to the lower limb.
By tracking targets on each limb segment of the lower limb, joint angles at the knee hip and ankle can be measured.
An instrmented force platform is used to measure the magnitude, direction, and location of the ground reaction force. Two force platforms (one under each foot) can be seen in the figure.
Combining the ground reaction forces, with the limb segment motion data provides the basis for calculating joint loading (net reaction moments and forces). These data are used to quantify the gait pattern.

Gait Cycle
Walking is a cyclic process; therefore, the relevant information can be captured during one complete gait cycle, which is the time between successive foot contacts of the same limb.

More Info
• Gait analysis (Wikipedia)
• Motion analysis theory (Kwon3D)

( Fully trained at the Asics Biomechanics Academy, the UK’s leading footwear supplier. )


How we think we are running and how we actually are running are sometimes two very different things. The use of high tech video analysis is no longer reserved just for professional athletes!




We will determine your foot type by assessing the structure of the foot including shape, width, volume and arch height. We then analyse the gait cycle that is unique to each runner by observing the biomechanics of the foot in motion.

We can view and analyse motions at the joints at speeds up to 60 frames per second, 3600 frames in a 2-step gait cycle. There are three stages of the gait cycle. Heel strike, mid-stance, and toe off. It is impossible to see with the naked eye what is exactly happening to the foot and ankle at each of these phases of gait.



With video gait analysis we can clearly see what is happening at each of these phases and measure imbalances. After analyzing your gait we will go over your tape with you, and point out problems that can be corrected with orthotics. We are able to look for gait imbalances, limited range of motion problems, and muscle insufficiencies from all sides to help you with your treatment. We can measure angles at your feet, ankles, knees and hips at all phases of your gait.

The next stage is to have a semi weight-bearing cast of your feet made. These along with your examination results will be made into a custom-made pair of running orthotics. These special insoles go inside your running shoes and help to cure your running injury by correcting any biomechanical dysfunction and making your running as efficient as possible.


Runners, especially, can benefit from video gait analysis by evaluating muscle strength, gait disturbances, shoe choices, and overall training. The one aspect that a runner can control the most is biomechanics. Though it is probably the easiest aspect in running to address, biomechanics is probably the most forgotten link in the improvement chain. Understanding biomechanics is, for most runners, the most neglected and confusing subject in running.





Questions







What is a gait analysis?
A gait analysis involves videotaping you while you walk and/or run to measure excessive or atypical movement patterns. Videotaping is done from the front, side, and rear to obtain a complete view of how you walk and run (your gait mechanics). The information from this is combined with your assessment to provide a comprehensive analysis of your walking and running mechanics.
I've had this injury for several years now. Can you really help?
Absolutely! Many chronic or recurrent injuries are the result of muscle imbalances, muscle weakness, and poor running and walking mechanics. This service is designed to give you a comprehensive analysis of all these factors and provide solutions.
I have pain while doing other sports (soccer, hockey, biking). Can this help me?
Most people have pain while doing other sports. It is also known that daily walking and/or running can aggravate these injuries. This service can help you overcome injuries by identifying how your muscle imbalances, structural differences, and gait mechanics are all related.
I keep getting the same injury over and over. How come?

Many times the way you walk and run is related to muscle weakness and structural imbalances. Injuries commonly reoccur because most people are unaware that the way the walk or run is directly related to these clinical factors.

Can I keep running while I'm injured?

You should significantly reduce your mileage while your injured. However, by correcting the way you run, you can rehabilitate from your injuries much quicker while continuing to run.





READ MORE - Kesehatan Jiwa Menjadi Prioritas Global di Indonesia

ASPEK FISIOTERAPI SYNDROMA NYERI BAHU

0leh: Heru Purbo Kuntoro, Dipl. P.T., M. Kes

Sindroma nyeri bahu hampir selalu didahului atau ditandai adanya rasa nyeri pada bahu terutama pada saat melakukan aktifitas gerakan yang melibatkan sendi bahu sehingga yang bersangkutan ketakutan menggerakkan sendi bahu. Keadaan seperti ini apabila dibiarkan dalam waktu yang relatif lama menjadikan bahu akan menjadi kaku.
Beberapa faktor penyebab dapat dikelompokkan menjadi:
1. Kelompok Muskuloskeletal
2. Kelompok Neurogenik
3. Kelompok Vaskuler
4. Kelompok Nyeri Rujukan
5. Kelompok Persendian (Colliet 1981)
0leh: Heru Purbo Kuntoro, Dipl. P.T., M. Kes

Sindroma nyeri bahu hampir selalu didahului atau ditandai adanya rasa nyeri pada bahu terutama pada saat melakukan aktifitas gerakan yang melibatkan sendi bahu sehingga yang bersangkutan ketakutan menggerakkan sendi bahu. Keadaan seperti ini apabila dibiarkan dalam waktu yang relatif lama menjadikan bahu akan menjadi kaku.
Beberapa faktor penyebab dapat dikelompokkan menjadi:
1. Kelompok Muskuloskeletal
2. Kelompok Neurogenik
3. Kelompok Vaskuler
4. Kelompok Nyeri Rujukan
5. Kelompok Persendian (Colliet 1981)

Secara praktis fisioterapi untuk mempermudah diagnosis kerja membagi faktor penyebab nyeri menjadi:
1. Faktor gerak dan fungsional (movement & function) dan
2. Faktor penyebab Neurogenik yang berkaitan dengan nyeri rujukan dari organ dalam interkostal dan abdominal yang se-segmen dengan persyarafan sympatis asli dan atau nyeri rujukan dari persyarafan sympatis perifer yang sesegmen dengan persyarafan somatis sendi bahu.

I. FAKTOR PENYEBAB DAN GERAK FUNGSI
Gerak atau aktifitas kerja fungsional sehari-hari yang membebani struktur persendian bahu, misalnya pada karyawan tukang cat, pemain tennis, juru ketik dan sebagainya yang terkait dengan aktivitas gerak bahu.

Pada kelompok orang-orang tersebut, nyeri bahu terjadi oleh karena aktivitas yang dilakukan pada posisi abduksi-elevasi sedikit eksorotasi. Pada aktivitas gerak ini maka peran dan kerja otot “rotator cuff” terutama m. supraspinatus sering terjadi impangement (terjepit) antara kaput humeri dan akromion atau ligamentum coraco akromiale.

Keadaan ini sangat potensial menimbulkan cedera pada otot pada supraspinatus dan yang bersangkutan sering mengeluh pegal dan nyeri. Mekanisme yang sama dapat terjadi otot kelompok “rotator cuff” yang lain berdasarkan pada gerak yang terjadi dan melekat karena kerja otot apa yang dominan.

Gambar m. supraspinatus

Penyebab nyeri gerak dan fungsi, sangat erat kaitannya dengan mekanisme gerak yang terjadi pada sendi bahu baik secara osteokinematik maupun secara orthokinematik. Mengingat bahwa secara anatomis pergerakan sendi bahu melibatkan banyak persendian (8 sendi) yaitu : glenohumeral, suprahumeral, acromioclavicular, scapulo cathalis, sterno clavicular, kostosternal, costa vertebralis dan vertebralis cervical 4 s/d thoracal 8, maka proses-proses patologik yang termasuk dalam nyeri bahu juga banyak macamnya.

Gambar Sendi Gerak

Nyeri bahu dengan penyebab gerak dan fungsi yang paling sering terjadi adalah disebabkan oleh karena tendinitis supraspinatus, ruptur rotator cuff, bursitis dan kapsulitis adhesiva. Semua keadaan sering disebut dengan frozen shoulder atau perioartritis humero & kapulari.

Satu hal yang perlu dan penting diperhatikan adalah karakterisitik keterbatasan yang spesifik menunjukkan bahwa toper lesi sudah diikuti kontraktur dari kapsel sendi. Dengan pemahaman ini maka intervensi rasional fisioterapis yang paling penting adalah mobilisasi sendi dengan pendekatan manipulatif disamping intervensi yang lain.

Pada gejala yang non spesifik pada nyeri bahu pada umumnya sifat keterbatasan dan nyeri tidak mengikuti pola yang spesifik, sering disebut “non capsulair pattern” keterbatasan bukan pada kapsuler (non kapsuler).

Keluhan nyeri pada sendi bahu yang bersifat non kapsuler dapat terjadi oleh karena kelainan yang bersifat “impagement” dan kelainan neurologis yang bersifat syndroma. Secara klinis gambaran patologis nyeri sendi bahu dapat dapat dicermati dari beberapa kondisi sebagai berikut :

1. Gangguan Myotakal Pada “Rotator Cuff”Yang Meliputi:
A. TENDINITIS
Nyeri bahu pada pekerja yang dalam aktifitasnya harus mengangkat beban berat, bukan disebabkan oleh proses degenerasi, melainkan terjadi bila lengan harus diangkat sebatas atau melebihi tinggi akronion. Posisi yang sedemikian ini bila berlangsung terus-menerus juga akan menyebabkan terjadinya iskemia pada tendon.

Gambar 2 : Sirkulasi darah daerah bahu
A. Sirkulasi ke “rotator cuff” B. Daerah Iskemia akibat tarikan

Iskemia ini selanjutnya dapat mengakibatkan terjadinya atropi kelemahan otot daerah pundak sehingga daerah tersebut kelihatan kempis.

Degenerasi yang progresif pada “rotator cuff” biasa terjadi pada mereka yang kurang/tidak mewaspadai adanya rasa nyeri dan gangguan fungsi pada bahu. Pada decade ke-5, kebanyakan otot “rotator cuff”telah mulai tertarik serta memperlihatkan tanda-tanda penipisan dan fibrotisasi. Penipisan dan degenerasi ini terutama terjadi pada daerah kritis (critical zone).

Pada keadaan lebih lanjut, kemungkinan terjadinya ruptur ringan akan bertambah lebar, pada keadaan ini proses degenerasi akan diikuti erosi pada tuberkulum humeri. Erosi yang terjadi menekan tendon biceps sehingga sulcus bisipitalis pada kondisi parah seolah-olah menghilang. Bursa sub akromialis menjadi ikut terjepit di daerah tersebut sehingga dinding bursa menebal.

Gambar 4. : Proses terjadinya degenerasi

Bila terjadi ruptur tendon atau klasifikasi, dinding bursa ini menjadi tegang. Permukaan bawah akronion oleh adanya gesekan dan tekanan dari humerus, akan mengeras dan menebal.

Pertambahan usia harus dipertimbangkan sebagai factor yang berperan penting dalam proses tendinitas degenerative, meskipun factor-faktor yang lain juga memegang peranan. Pertambahan usia juga mempengaruhi luas gerak sendi, yang disebabkan oleh perubahan posisi scapula. Perubahan posisi scapula ini sebagai akibat dari bertambahnya lengkung kiposis torakal karena degenerasi diskus intervertebralis.

Kalsifikasi Pada Tendinitis
Penimbunan kristal kalsium fosfat dan kalsium karbonat pada “rotator cuff” sangat sering terjadi. Garam ini tertimbun dalam tendon, ligamen, aponeurosis dan kapsul sendi serta dinding pembuluh darah. Penimbunan ini berhubungan dengan perubahan degenerasi. Umumnya terjadi pada daerah kritis dimana degenerasi ini dapat menyebabkan ruptur atau nekrosis pada tempat penimbunan kalsium. Secara sederhana proses terjadinya kalsifikasi pada tendonitis dapat dilihat pada gambar 5.

Gambar 5 : Proses terjadinya calcific tendonitis
A. Tendon M. Supra spinatus (cuff) antara lig. Coraco acromial dan caput humeri.
B. Tekanan yang berulang karena kegiatan sehari-hari serta posisi kerja yang slah.
C. Perubahan degeneratif pada critical zone

Penimbunan pertama kali didapatkan di dalam tendon, kemudian menuju permukaan, selanjutnya ruptur ke atas menuju ruan di bawah bursa subdeltoid. Evakuasi kalsium dari timbunan yang ruptur juga sementara saja dan rasa nyeri ini kemudian dapat timbul kembali. Evakuasi kalsium ke ruang bawah bursa akan menekan ke atas ke arah dasar bursa. Dengan iritasi dan tekanan, timbunan ini dapat ruptur ke dalam bursa itu sendiri. Ruptur ini terjadi akut dan menimbulkan nyeri hebat. Di dalam bursa timbunan ini dapat meluas ke lateral maupun distal (medial) sehingga berbentuk seperti dumbbell dengan pemisahnya adalah ligamentum korakoakromialis.

Dalam keadaan ini baik abduksi maupun adduksi bahu tidak lagi dapat dilakukan sepenuhnya (akan terganggu). Bahu biasanya terpaku dalam keadaan sedikit abduksi (30 s/d 40 derajat) yang akan menghambat gerakan bahu ke semua arah.

Radang bursa yang terjadi berulang kali oleh karena adanya tekanan yang terus-menerus dapat menyebabkan penebalan dinding bursa, pengentalan cairan bursa dan selanjutnya perlekatan dinding dasar dengan atas bursa, sehingga timbul perikapsulitis ahesive. Akhirnya timbul “frozen shoulder” (bahu beku)

Gambar 6 : Evolusi dari kalsifikasi pada tendonitis dan terjadinya “bursitis”
1. Posisi normal tendon supra spinatus dan bursa sub deltoid.
2. Letak timbunan kalsium pada tendon “rotator cuff”.
3. timbunan kalsium mulai keluar ke ruang di bawah bursa.
4. Evakuasi sebagai kalsium, namun sebagian besar masih berada dalam tendon.
5. Evakuasi berlanjut, ruptur ke dalam bursa.
6. Perluasan di dalam bursa terbentuk “dumbbell”.
7. Perlekatan dinding bursa oleh karena penebalan dinding dasar dan atap bursa serta pengentalan cairan bursa.
Tendinitis pada daerah bahu yang sering terjadi adalah tendinitis supraspinatus dan tendinitis bisipitalis.

Tendinitis Supraspinatus
Tendon otot supraspinatus sebelum berinsersio pada tuberkulum majus humeri, akan melewati terowongan pada daerah bahu yang dibentuk oleh kaput humeri (dengan bungkus kapsul sendi glenohunerale) sebagai alasnya, dan akromion serta ligamentum korako akromiale sebagai penutup bagian atasnya. Disini tendon tersebut akan saling bertumpang tindih dengan tendon dari kaput longus biseps. Adanya gesekan dan penekanan yang berulang-ulang serta dalam jangka waktu yang lama oleh tendon biseps ini akan mengakibatkan kerusakan tendon otot supraspinatus dan berlanjut sebagai tendinitis supraspinatus.

Tendinitis supra spinatus dapat disertai ataupun tanpa adanya kalsifikasi. Ada tidaknya kalsifikasi tidak mempunyai hubungan langsung dengan ada tidaknya rasa nyeri.
Penderita tendinitis biasanya datang dengan keluhan nyeri bahu yang disertai keterbatasan gerak sendi bahu. Bila ditelusuri, daerah rasa nyerinya adalah di seluruh daerah sendi bahu. Rasa nyeri ini dapat kumat-kumatan, yang timbul sewaktu mengangkat bahu. Pada malam hari nyeri ini dirasakan terus-menerus, dan bertambahnya nyeri bila lengan diangkat. Keluhan umum yang biasanya disampaikan adalah : kesulitan memakai baju, menyisir rambut, memasang konde atau kalau akan mengambil bumbu dapur di rak gantung bahunya terasa nyeri.

Pada pemeriksaan gerak dijumpai adanya
• Painfull arc supraspinatus 0-60 derajat
• Keterbatasan gerak sendi bahu, terutama abduksi dan eksorotasi.
• Nyeri tekan pada daerah tendon otot supraspinatus.
• Tes “Apley Scratch” dan “Mosley”: positif. (Kedua tes ini bukan merupakan tes khusus bagi tendinitis supraspinatus saja. Tes “Apley Scratch” sedang tes dan “Mosley” juga positif pada kerusakan otot “rotator cuff” yang lain).
Tendinitis Bisipitalis
Tendon otot bisep dapat mengalami kerusakan secara tersendiri, meskipun berada bersama-sama tendon otot supraspinatus. Tendenitis ini biasanya merupakan reaksi terhadap adanya trauma akibat jatuh atau dipukul pada bahu, dengan lengan dalam posisi adduksi serta lengan bawah supinasi. Atau dapat juga terjadi pada orang-orang yang bekerja keras dengan posisi seperti tersebut diatas dan secara berulang kali.

Tendinitis bisipitalis memberi rasa nyeri pada bagian depan lengan atas. Penderitanya biasanya datang dengan keluhan : “ kalau mau mengangkat benda berat bahunya sakit”, atau “kalau membawa jinjingan di pasar bahunya terasa nyeri”.
Pemeriksaan fisik pada penderita tendinitis bisipitalis didapatkan adanya :
• Adduksi sendi bahu terbatas
• Nyeri tekan pada tendon otot biseps (pada sulkus bisipitalis/sulkus intertuberkularis).
• Tes “Yergason” disamping timbul nyeri juga didapati penonjolan disamping medial tuberkulum minus humeri, berarti tendon otot bisep tergelinsir dan berada di luar sulkus bisipitalis (terjadi penipisan tuberkulum).
B. BURSITIS
Merupakan peradapan dari Bursa. Kelainan ini jarang primer, tetapi biasanya sekunder terhadap kelainan degenerasi dari “rotator cuff”. Bursitis subdeltoideus.

Penderita bursitis subkromialis, keluhan pertamanya adalah “tidak dapat mengangkat lengan ke samping (abduksi aktif)”, tetapi sebelumnya sudah merasa pegal-pegal di bahu. Lokasi nyeri yang dirasakan adalah pada lengan atas atau tepatnya pada insersio otot deltoideus di tuberositas deltoidea humeri. Nyeri ini merupakan nyeri rujukan dari bursitis sub kromialis yang khas sekali. Ini dapat dibuktikan dengan penekanan pada tuberkulum humeri. Tidak adanya nyeri tekan di situ berarti nyeri rujukan.

Bursa subdeltoideus merupakan lapisan sebelah dalam dari otot deltoideus dan akronim, serta lapisan bagian luar dari otot “rotator cuff”. Bursa ini sedikit cairan. Gerakan abduksi dan fleksi lengan atas akan menyebabkan dua lapisan dinding bursa tersebut saling bergesekan. Suatu peradangan pada tendon juga
akan menyebabkan peradangan pada bursa.

Pemeriksaan fisik dijumpai:
• Painfull arc sub acromialis 70 – 120 derajat.
• Tes flexi siku melawan tahanan pada posisi flexi 90 derajat menjadikan rasa nyeri.
C. RUPTUR “ROTATOR CUFF”
Ruptur “rotator cuff” ternyata terjadi lebih sering daripada yang kita duga. Semula diagnosa ini hanya dipertimbangkan bagi mereka yang bekerja berat dan cenderung mudah mengalami trauma hebat. Ternyata pada autopsi sering terlihat adanya ruptur “rotator cuff” pada golongan umur empat puluh tahun, meskipun tanpa keluhan pada bahu semasa hidup.

Otot “rotator cuff” dapat robek akibat kecelakaan. Bagi penderita akan langsung merasakan nyeri pada daerah persendian bahu bagian atas. Hal ini umum terjadi pada anak-anak atau dewasa muda. Pada orang tua, ruptur dapat terjadi akibat trauma yang ringan saja, disebabkan oleh adanya degenerasi pada “rotator cuff”. Untuk keadaan ini, biasanya tanpa disertai keluhan nyeri. Keluhannya hanya berupa kesulitan mengabduksi lengan.

Pada pemeriksaan fisik, umumnya penderita dapat melakukan abduksi sampai 90 derajat, namun bila diminta meneruskan abduksi tersebut (elevasi), tidak akan dapat dan bahkan mungkin lengan atas jatuh. Pada pemeriksaan kekuatan otot (MMI), nilai kekuatan otot tidak akan lebih dari 3 (Fair). Gerak pasif biasanya tidak menimbulkan rasa nyeri, juga tidak ada gangguan. Tes “Moseley” atau tes “lengan jauh” akan menunjukkan hasil yang positif. Bila tes “Moseley” positif, perlu dilakukan pemeriksaan arterografi.

2. Kapsulitis Adhesiva
Untuk semua gangguan pada sendi bahu yang menimbulkan nyeri dan keterbatasan luas gerak sendi (R.O.M) istilah yang luas dipergunakan “Frozen Shoulder”. Karenanya ada berbagai macam keadaan yang termasuk dalam “Frozen Shoulder”. Kondisi ini sering dihubungkan dengan : Kapsulitis adhesiva, periartritis, perikapsulitis, bursitis obliteratif, komponen bahu dari “Shoulder hand syndrome” dan periartritis skapulohumeral.

Kapsulitis adhesive ditandai dengan adanya keterbatasan luas gerak sendi glenohumeral yang nyata, baik gerakan aktif maupun pasif. Ini adalah suatu gambaran klinis yang dapat menyertai tendinitis, infark myokard, diabetes melitus, fraktur immobilisasi berkepanjangan atau redikulitis servikalis. Keadaan ini biasanya unilateral, terjadi pada usia antara 45 – 60 tahun dan lebih sering pada wanita.
Nyeri dirasakan pada daerah otot deltoideus. Bila terjadi pada malam hari sering sampai mengganggu tidur.

Pada pemeriksaan fisik didapatkan adanya kesukaran penderita dalam mengangkat lengannya (abduksi), sehingga penderita akan melakukan dengan mengangkat bahunya (= srugging). Juga dapat dijumpai adanya atropi otot gelang bahu (dalam berbagai tingkatan). Sedangkan pemerikasaan neurologik biasanya dalam batas normal. Sifat keterbatasan meliputi pola kapsuler.

II. FAKTOR PENYEBAB PENYAKIT NEUROGENIK
Nyeri bahu yang diakibatkan oleh factor neurogenik dapat bersifat
1. Radikuler apabila terjadi tekanan pada akar saraf servikal yang menginervasi sendi bahu
2. Radikuler akibat entrapment pada m. supra scapular, dorso scapular, lesi plexus bracialis
3. Tumor myelum
4. Artero sclerotic occlusion
5. Posterior primary rami lower thoracic nerve entrapment

Dan Nyeri rujukan berasal dari segment somatic, sympatis perifer rami sympatis asli yang menginervasi organ intra thoracal dan intra abdominal.

Gambar 6. Nyeri akibat faktor neurogenik

Gangguan nyeri bahu akibat kelainan neurologis dan entrapment pada saraf tepi meliputi:
A. Tekanan Pada Akar Saraf Servikal
Cervikal Nerve Root pressure = "cervical radiculitis = cervical entrapment.
Penyebab Tekanan Akar Saraf Servikal antara lain:
• Cervical spendylosis.
• Cervical disk herniation.
Kelainan pada servical yang menyebabkan nyeri pada bahu ini biasanya disebabkan oleh karena kompresi akar saraf cervikal yang terjadi di antara ruang vertebraservikalis V - VI atau VI - VII dengan kompresi pada akar saraf C6 atau C7.

Pada gangguan ini biasanya dirasakan leher kaku dan nyeri, dan timbu1 "paresthesia" yang menjalar dan leher turun sisi laterial bahu, kelengan dan kadang sarnpai pada jari-jari.

Kelemahan pada segmen myotom dapat pula terjadi bila tekanan akar saraf ini disebabkan oleh karena herniasi diskus servikalis, fleksi leher akan rnemyebabkan rasa sakit bertambah dan begitu pula rasa paraesthesia. ("degenerative arthritis"), ekstensi leher akan menekankan sendi luschka yang hepertropi ke akar saraf yang terjepit itu.
Komposisi akar saraf C6 menyebabkan :
• Nyeri dan kaku pada leher
• Rasa nyeri dan tebal dirambatkan ke ibu jari dan sisi radial tangan.
• Dijumpai kelemahan pada bicep
• Berkurangnya reflek bicep
• Dijumpai rasa nyeri alih (“referred pain”) di bahu yang samar, dimana “nyeri bahu" hanya dirasa betah didaerah deltoideus bagian lateral dan daerah infra scapula atas.
Kompresi akar saraf C7 menyebabkan:
• Rasa bebal dan nyeri yang dialihkan ke jari tengah dan jari telunjuk dan punggung tangan dan pada tingkat lebih lanjut terjadi hiperaestesi di dermatom C7.
• Terjadi kelemahan dan atropi pada m. trisep
• Penurunan reflek tendon trisep.
Menurut Caillet penyakit diskus servikal dengan osteofit biasanya asimtomatik dan menimbulkan nyeri karena trauma atau fres pastural, atau ketegangan emosi. Dikatakannya bahwa sikap tubuh (posture) saja dapat merupakan trauma yang mengawali nyeri servikal atau Radikuler, misalnya ketegang otot kuduk karena keletihan akibat kontraksi isometrik berkepanjangan (misalnya berjam-jam kerja atau membaca pada meja yang tidak memenuhi syarat-syarat ergonomi mengakibatkan penarikan terhadap saraf spinal sehingga terjadi nyeri pada akar saraf atau saraf yang melintasi foramen intervertebral yang menyempit tadi. Sikap kepala kearah anterior atas dasar sikap punggung yang membungkuk, menyebabkan pertambahan lordosis servikal dengan penyempitan foramen intervetebrale dan saling mendekatnya procesus artikulasio yang berhadapan.

Depresi merupakan kondisi emosi yang paling utama yang menyebabkan sikap bungkuk. Diagram dan penyakit diskogenik servikal terutama berdasarkan riwayat dan pemeriksaan fisik. Pemeriksaan tambahan seperti photo polos vertebra servicalis, EMG dan MRI serta pemeriksaan yang lain perlu dipertimbangkan menurut kebutuhan selain pengobatan baik dengan analgetika maupun traksi leher, “Collar immobilization”, latihan otot leher dan sikap kukuh perlu pula dengan pendekatan fisik kiatrik terhadap depresinya yang kadang merupakan faktor dasar nyeri bahu ini.

B. Tumor Myelum
Tumor di myelum di daerah servikal dapat memberikan gejala serupa herniasi diskus servikal pada stadium awalnya tetapi biasanya dijumpai keluhan dan gejala yang progesip.

Laesi tunggal pada akar saraf kemudi disusul dengan laesi multipel dan bilateral, yang kenudian menimbulkan tanda-tanda laesi upper motor neuron dengan kelemahan yang kemudian disusul dengan kelumpuhan dan inkoordinasasi dari kaki dan disfungsi dan kandung kemih dan rektun.

Diagnosis ditegakkan dengan riwayat keluhan dan gejala yang progresif tadi, adanya kelainan yang multipel dan tanda-tanda UMN (Upper Motor Neuron) lesi. Pemeriksaan tambahan dimulai dengan fungsi lumbal (harus hati-hati), caudografi atau CT scan perlu untuk tindakan selanjutnya.

C. Laesi Pada Plexsus Brachialis
Pleksus brachialis dapat merupakan sumber rasa nyeri di daerah bahu, dan penyebabnya dapat oleh karena trauma dan mekanis: iritasi non traumata. Trauma pada pleksus brachialis dapat disebabkan oleh karena luka tembus, dislokasi akibat fraktur, atau akibat roda paksa tarikan.

Hal-hal tersebut diatas menyebabkan rasa nyeri pada bahu dan dapat dijumpai gangguan sensorik dan motorik dan banyak akar saraf dan C5 sampai Tl dan untuk menentukan tempat lesi secara tepat dapat dilakukan pemeriksaan dengan EMG dan MRI.

Kompresi pleksus brachialis yang mekanik non traurnata dapat disebabkan oleh karena keadaan klinik yang disebabka oleh karena sidroma rongga servikal dorsalis (“Cervica dorsal autlet syndroma”) yang rneliputi sindroma pektoralis minor, sindroma kosto klavikula dan sindroma iga servikal.

Gejala yang ditimbulkan disebabkan oleb karena gangguan pada pleksus brachialis atau arteri subclavia, atau keduanya, olek karena tulang, ligament atau otot-otot diantara vertebral servikal dan batas bawah. Daerah tersering yang terkena adalah di regio supra klavikula di daerah yang padat yang terisi dengan iga I, klavikula, dan vertebral servikal yang terbawah dengan jaringan didalamnya.

D. Sindroma Skapulokostal
Penyebab terserang dari nyeri bahu dengan rasa nyeri lokal dibahu dengan perambatan kebagian distal lengan dan tangan adalah sindroma skapulokostal. Dikatakan sindroma ini dijumpai 90 % dan semua rasa nyeri didaerah servikobrachial.

Sindroma ini disebut juga "postural fatique" dan akan mempengaruhi penderita selama masa istirahat. Gaya berat komponen skapula menyebabkan terjadinya sindroma ini. Sindroma ini juga menyebabkan kompresi neurovaskular di fossa supraklavikula yang gejalanya sama dengan gejala yang dijumpai pada igaservikal, sindroma skalenus anterior, sindroma klavikokostal dan sindrorna pektoralis minor.

Gejala ini terjadi pada penderita waktu istirahat pada posisi tegak (duduk atau berdiri). Prinsip utama dan sindroma ini adalah rotasi ke distal dari gerakan skapulokostal dan skapula yang memutar bagian redial dan superior skapula ke proksimal dan lateral. Akibat gerakan penarikan skapula kebawah menyebabkan tarikan pada otot-otot levator scapula, yang menyebabkan otot-otot ini terangsang dan rnengalami iskemia dan terjadilah spasme.

Dan timbullah gejala-gejala seperti dibawah ini:
1. Rasa nyeri hemikranial (nyeri kepala sesisih) yang disebabkan karena salah satu atau semua penyebab dibawah ini :
• Tekanan pada n. oksipitalis magnus oleh karena regangan fascia cervicalis profunda segitiga posterior leher).
• Tegangan pada periosteum kraniun pada perlekatan otot trapezius atau elevator skapula.
• Nyeri Rujukan (referred paint) dari leher akibat lordosis berlebihan yang menyebabkan penyempitan akar saraf pada foramen intervertebralis.
2. Rasa nyeri pada sisi posterolateral dan leher.
Gejala radikuler kebawah yang ipsilateral ekstremitas atas baik vaskuler atauneurologik atau keduanya.Paresthesia dapat unilateral atau bilateral dan biasanya pada distribusi dari n. ulnaris. Akibat kiposis torakalis pada “fatique posture" dan saraf torakalis V dan VI dapat menyebabkan iritasi dan menyebabkan nyeri pada sudut inferior skapula.
Diagnosis didasarkan atas:
• Observasi dari sikap : “dorsal round back khyposis dengan lordosis servikalis kompensata yang meningkat dan kepala terdorong kemuka.
• Adanya bahu yang lentur riwayat dari penyabab yang menyebabkan sikap ini juga membantu untuk menentukan diagnosa.
• Menimbulkan daerah pencetus nyeri (trigger point area) di otot-otot scapula yang meliputi hiperalgesia, hiperasthesi dan allodynia Untuk ini diperlukan pemeriksaan yang teliti untuk mencari titik pencetus (trigger point area) atau daerah nyeri rujukan dengan tekanan digital.
E. Iga Servikal = "Carvical Rib”
Pada umumnya hanya pada vertebra thorakalis saja yang terdapat tulang rusuk, tetapi pada 1 % populasi terutama pada wanita terbentuk rusuk tambahan pada daerah servikal yang bilateral, dan jarang rusuk tambahan ini memberikan gejala. Bila menimbulkan gejala dapat gejala timbul karena gangguan vaskuler, neurologik atau keduanya. Keluhan Neurologi dapat berupa : kelainan sensoris antara lain: nyeri, hiperasthesi, para asthesia atau hipoasthesia dan kelainan motoris berupa kelemahan otot pernapasan.

Gangguan neurologik ini akibat gangguan pada nerviservikalis VIII dan nervithoracalis I, dengan rasa sakit dan tebal pada sisi ulnair tangan dan pada jari manis dan jari kelingking: kelemahan otot-otot kecil ditangan dapat pula terjadi dan biasanya terdapat pula gangguan vaskuler.
Penanganan untuk iga servikal ini harus intensif, secara konservatif dilakukan:
1. Perbaikan sikap tubuh
2. Perbaikan tonus otot pada sendi bahu
3. Pemasangan brace untuk membuat elevasi bahu pun dapat dikerjakan.

Tindakan pembedahan dengan memotong iga tambahan tersebut atau otot sealenus, dilakukan bila terdapat gangguan pada arteri subclavia yang ditandai dengan kepucatan, rasa dingin, kelemahan otot. Untuk mengatasi gangguan arteri dilakukan retrograde arterografi.

F. Thoracic Outlet Compression Syndrome
1. Sindroma skalenus anterior (scalenii anticus syndrome)
Keluhan utama sindroma skalenus anterior adalah adanya rasa bebal dan bergetar pada lengan, tangan dan jari-jari dan rasa yang seperti ditusuk ini seringkali pada waktu malam hari yang sering membangunkan penderita. Kelemahan pada jari-jari didapatkan terutama bila ada rasa sakit dan dirasakan sebagai rasa sakit yang dalam dan seperti ditusuk.

Pemeriksaan fisik biasanya tidak terdapat kelainan, dan pemeriksaan tertentu misalnya dengan “adson test”, yaitu dengan memutar kepala pada sisi keluhan, dan kepala diekstensikan ke belakang, lengan diabduksikan, dan penderita disuruh bernapas dalam. Dengan tes ini timbul rasa nyeri dan denyut nadi radial akan berubah.
Mekanisine tes ini adalah sebagai berikut :

Rotasi dan posisi ekstensi leher akan menyebabkan otot Scaleneus dalam keadaan tegang, dan ini akan menyempitkan sudut diantara otot itu dengan iga pertama, dengan inspirasi dalam yang melekatkan m. scaleneus yang berfungsi sebagai otot tambahan pernapasan akan mengangkat iga dan ini akan menekan gabungan neurovaskuler yang ada. Spasme otot scalenus dapat disebabkan oleh karena sikap tubuh, stres karena pekerjaan, dan atau keadaan emosionil yang lama. Dan mungkin pula, spasme otot scalenus ini disebabkan oleh karena sekunder akibat radikulitis servikalis akibat spondylosis, penyakit diskogenik, atau fibrosis akar saraf.

Gambar: Thoracic Outlet

2. Sindroma klavikulokostal (klavikulokostal manuver)

“Neurovascular bundle” dapat terjepit diantara iga pertama dan klavikula pada tempat dimana pleksus brachialis dan pembuluh arteri, vena melintas di iga pertama. Keluhan adalah serupa dengan sindroma skalenus anterior dan tanda yang dijumpai juga minimal. Keluhan dapat ditimbulkan dengan menyuruh penderita untuk menekan bahu kebawah dan kebelakang. Dan costo clavicularis manuver test ini mula-mula dikerjakan oleh penderita kemudian, secara pasif dilakukan tekanan kebawah oleh pemeriksa.

Bising (“bruit”) akan terdengar bila pembuluh darah tertekan dan akan timbul kembali bila di1epas, dan ini merupakan cara pemeriksaan klinis, yang terbaik. Faktor penyebabnya antara lain kelelahan, trauma, dan stress, jadi dengan perbaikan sikap dan meningkatkan tonus otot dan "endurance" dapat mengurangi keluhan.

3. Sindroma Pectoralis Minor
Sindroma ini juga disebut sindroma hiperabduksi otot pec-toralis minor berasal dan rusuk III, IV dan V dengan in-sertio diprosesus Coracoideus discapula; dan pleksus brachialis bersama-sama arteri axialis dan vena melintasi rusukI dibawah riun. pectoralis.

Keluhan bebal dan bergetar dan tangan timbul bila ter~a-di kompresi gabungan saraf dan pembuluh darah diantara rn. pectoralis minor dan iga pertama, dan dapat diulangi bila lengan penderita diangkat diatas kepala diabduksikan dan ditarik kebelakang; dan mi akan menyebabkan kompresi pa-da gabungan saraf dan pembuluh darah tadi (Wright Test). Faktor Penyebabnya sama dengan sindroma scalenusanticus dan sindroma klavikulokosta, dan pengobatannya juga sama.

G. Superior Pulmonary Sulcus Tumor
Ca didaerah apex paru atau lazimnya disebut Pancoast tumor, dan memberikan tekanan pada pleksus brachialis dan menimbulkan gejala. Rasa sakit yang timbul biasanya hebat dan difus dan sekitar daerah tangan dan bahu. Disamping itu tumor juga mengadakan penekanan pada untaian ganglion simpatikus di daerah thorak dan menyebabkan terjadi sindroma hernia.

Biasanya disertai pula dengan memburuknya keadaan umum adanya kelainan dan photo thorak dan pada biopsi kelenjar dijumpai kelainan. Dengan sendirinya pengobatan adalah dengan pembedahan dan radiasi yang kemudian bila dilakukan tindakan rehabilita dengan melakukan suatu rangkaian latihan.

H. Supra Scapula Entrapment
Rasa nyeri pada bahu dapat pula disebabkan oleh karena "entrapment' pada n. suprascapularis pada jalannya melalui foramen suprascapular.

Saraf ini berasal dari C5 - C6 berjalan dibe1akang pleksus brachialis ke tepi atas skapu1a, dan berjalan rnelalui insisura supra skapula, dimana ditutup oleh ljgamenturn tranversolis scapula. kemudian masuk ke dalam fossa supraspinatus dan mensarafi sendi bahu, sendi akromio klavikula dan otot supraspinatus dan infraspinatus.

Dan saraf ini merupakan saraf motoris yang penting, rasa sakit akan dirasakan didaerah yang dilayaninya dan dirasakan sebagai rasa sakit yang sangat terasa didalam dan sulit untuk dijelaskan.
Daerah bahu bagian posterior lateral mendapatkan daerah nyerinya. Dan sering didapatkan atropi dan kelemahan otot saraf akan merentang maksimal bila lengan dalam posisi adduksi didada.

Aduksi lebih lanjut akan menekan sendi skapula thora calis dan menyebabkan tarikan pada saraf. Trauma biasanya merupakan penyebab utama terutama bila terjadi pemisahan akromio klavikuler yang dapat menyebabkan skapula bergerak ke depan dan medial. Diagnosa dibuat dengan gera kan yang dapat menyebabkan rasa sakit dengan menggerakkan scapula kemuka dari melintasi rongga dada dan rasa nyeri dada dengan blokade djdaerah supraskapula. Penanganan dengan mengobati penyebabnya, imobilisasi scapula pada posisi sedemikian sehingga tidak didapatkan regangan saraf dan blokade pada saraf secara berulang.

I. Posterior Primari Rami Lower Thoracic Nerve Entrapment
Rami dorsalis n. thoracis lower memberikan cabang ke lateral melintasi segment thoracal 7 kemudian memberikan persyarafan ke rotator cuff dan kapsul sendi bagian posterior sendi bahu. Apabila ketegangan otot rhomboid yang dapat mengganggu mobilitas vertebrae thoracal maka akan menimbulkan iritasi pada serat thoracis lower sehingga nyeri pada regio bahu bagian posterior dirasakan menyengat karena saraf ini komponen yang utama di daerah sensoris.

Gambar: Posterior Primari Rami Lower Thoracic Nerve Entrapment

J. Dorsal Scapular Nerve Etrapment
N. scapula dorsalis mensarafi rhomboideus, dan berasal dari C5 dan kemudian sesudah keluar langsung masuk di otot skaleneus medius.
Keadaan merangsang dengan setiap keadaan yang menyebabkan regangan otot, atau spasme dan otot-otot skaleneus.

Rasa sakit dirasakan tumpul dalam dan samar di daerah sisi medial skapula, karena saraf ini yang utama adalah motorik. Bila rasa sakit mengganggu dapat dilakukan pembedahan.

K. Arterio Sclerotic Occlusion
Arteno sklerosis dapat menyebabkan penyurnbatan dan akan mengurangi aliran darah dan rnenyebabkan denyut radialis berkurang. Keadaan ini menyebabkan "rasa nyeri claudication" bila penderita melakukan latihan yang berlebih dan sembuh bila istirahat. Sering terdengar bising sistolik dan diperlukan arteriogram/venogram untuk rnembedakan dengan menelusuri pada arteri innominata dan subclavia dengan/tanpa kompresi dan rusuk servikalis.

L. Bahu pada Hemiplegia
Penderita yang menga1ami gangguan pernbuluh dara otak (G.P.D.O.) kerap kali rnernpengaruhi bahunya dan menyebabkan disabilitas dan tidak jarang menyebabkan rasa nyeri. Kembalinya fungsi atau perbaikan fungsi dan bahu sangat penting untuk dapatnya melakukan aktifitas sehari-hari, kernbalinya fungsi tangan, keseimbangan tubuh, melakukan aktifitas rnemindahkan sesuatu dan ambulasi yang efektif. Tirnbulnya rasa nyeri akan mengurangi rehabilitasi penderita, dan nyeri bahu ini biasanya disebabkan oleh karena subluxatio dan sendi gleno humeral.

M. Nyeri Bahu Pasca Pembedahan
Pembedahan atas operasi sendi bahu biasanya dilakukan oleh adanya kerusakan struktur sendi yang sudah parah, sehingga tindakan konservatif tidak memungkinkan untuk dilaksanakan.

Salah satu contoh pembedahan sendi bahu adalah shoulder arthrocopy, sering dilakukan pada kondisi misalnya: kerusakan labium glenoidalis, ruptur rotator cuff, ruptur tendon biceps bracialis, dan kondisi lain yang menurut ortoped menyatakan indikasi.

Problem pasca pembedahan biasanya akan diikuti : oedema, sekitar sayatan. Nyeri dan gangguan mobilisasi. Tanda ini merupakan respon normal yang bersifat fisiologis.
Respon fisiologis penyembuhan kemudian akan segera diikuti oleh beberapa fase yaitu :
• Fase pendarahan. Fase peradangan (oedema) menunjukkan adanya vasedilatasi.
• Fase fibroblas (proliferasi) menunjukkan adanya pembentukan fibrinogen pada hari ke-2 dan setelah hari ke-4 sudah terbentuk jaringan endotel
• Fase remodeling dengan proses fisiologis durasi 1-3 minggu pembentukan jaringan kolagen, durasi 2-3 minggu hingga 3 bulan terjadi remodeling. Durasi setelah 3 bulan pembentukan struktur secara normal.
Biasanya keluhan nyeri terjadi pada fase fibroblas dan awal remodeling. Keadaan ini aktivitas acceptor nyeri (nociceptor) berperan untuk mempertahankan keseimbangan fungsi vasodilatasi melalui keseimbangan vaso motor pada system sympathetic. Keluhan nyeri berangsur-angsur berkurang hingga pada fase remodeling akhir.

Apabila keluhan nyeri masih terjadi pada fase remodeling akhir yang sudah diikuti oleh tanda atau gejala sebagai berikut:
1. masih adanya oedema
2. hyperhidrosis atau hypohydrosis
3. distrophic change
4. vaso motor instability
5. bone reabsortion
6. decreated motor function,
Maka aktivasi nociceptor dalam keadaan dis balance. Keadaan ini disebut dengan reflex symphatetic dystrophy syndrome. Maka hal ini sangat penting untuk dipahami mengingat intervensi secara rasional oleh fisioterapi berdasarkan kaidah-kaidah keilmuan fisioterapi. Dalam menangani keluhan nyeri bahu pada umumnya dan kondisi pasca operasi pada khususnya.

Sifat nyeri dan keterbatasan gerak sendi bahu dapat menunjukkan pola yang spesifik yaitu: pola kapsuler dan bukan pola kapsuler. Pola kapsuler pada sendi bahu yaitu gerak eksorotasi paling nyeri dan terbatasan kemudian diikuti abduksi dan endorotasi, atau dengan kata lain: gerak eksorotasi lebih nyeri dan terbatas dibandingkan dengan gerak endorotasi. Bukan Pola Kapsuler sendi bahu yaitu keterbatasan nyeri yang dapat terjadi pada sebagian arah gerak atau ke segala arah tanpa mengikuti pola kapsuler.

Gambar

Skema Pola Kapsuler


Skema Bukan Pola Kapsuler

Kesimpulan:
Sindroma nyeri bahu sangat komplek dan sulit untuk diidentifikasi satu persatu bagian secara detail. Guna memahami penyebab dan patologi sindroma nyeri bahu, maka dapat dikelompokkan menjadi :
- Faktor Penyebab:
1. faktor penyebab gerak dan fungsi, yang terkait dengan aktifitas gerak dan struktur anatomi
2. faktor penyebab penyebab secara neurogenik yang berkaitan dengan keluhan neurologic yang menyertai baik secara langsung maupun tidak langsung yang berupa nyeri rujukan.
Berdasarkan sifat keluhan nyeri bahu dapat dikelompokkan menjadi 2 yaitu:
1. Kelompok spesifik, mengikuti pola kapsuler dan
2. Kelompok tidak spesifik sebagai kelompok yang bukan mengikuti pola kapsuler
Intervensi fisioterapi harus memahami sifat keluhan untuk mendapatkan hasil yang optimal.

Pengertian Dari Beberapa Istilah
1. Pola Kapsuler
Keterbatasan gerak sendi yang spesifik mengikuti struktur kapsal sendi. Shoulder (glenohumeral) mengikuti keterbatasan yang paling terbatas yaitu eksorotator, abduksi dan endorotator.
2. Aktualitas
Keadaan nyata untuk menentukan derajat keluhan pada saat pemeriksaan dilaksanakan. Aktualitas ini menunjukkan aktivasi dari proses patologi yang terjadi.
3. Aktualitas Tinggi:
- Keluhan nyeri yang tejadi pada saat istirahat dan malam hari
- Keluhan nyeri bergerak dengan peningkatan ketegangan
- Nyeri menjalar ke dorsal
- Nyeri timbul saat mulai gerak sampai akhir gerak
- Test dengan pembebanan (gerak melawan tahanan selalu timbul nyeri
4. Aktualitas Sedang
Keluhan nyeri antar aktualitas rendah dan tinggi
5. Aktualitas Rendah
- Keluhan nyeri tidak terjadi saat istirahat dan malam hari
- Keluhan nyeri tidak terjadi pada saat ketegangan bergerak
- Nyeri lebih terlokalisasi
- Nyeri timbul terutama pada akhir gerak
- Test dengan pembebanan timbul nyeri apabila berulang-ulang
6. Impingement
Merupakan suatu sindroma akibat penekanan atau penarikan dari struktur alat gerak yang melintasi bangunan antara caput humeri dan coraco acromialis sewaktu lengan bergerak aktif flexi elevasi. Selama itu dapat terjadi dengan entrapment pada pembuluh darah (arteri/venum), saraf misalnya pada Thoracic Outlet Compression Syndrome (TOC).
7. Painfull Arc
Sindroma nyeri yang timbul akibat penekanan pada tendon dan busa acromialis sewaktu gerakan shoulder mencapai lingkup gerak sendi antara 70 – 120 derajat.
8. Tes Fisiometric melawan tahanan pada otot atas rotator cuff: eksorotasi, abduksi, endorotasi.
9. PSI (Partial Shoulder Imobilitation)
Keterbatasan sebagian sendi bahu akibat mobilisasi, misalnya : flexi-elevasi, abduksi elevasi.
10. Tes Abduksi Glenohumeral
Posisi Pasien: duduk di kursi (stoel) kemudian lengan di abduksikan normal dengan sudut 90 derajat.

DAFTAR PUSTAKA
Bekkering G.E.. Eviidence Based Fyiotherapie hij patienten met Shouder Klachten
Wetensschpplijke onderbouwing van de KNGF-richtlijn. Nederlands Tijdschrift voor Fysiotherapie. Jaargang III. 2001.

Cailliet R.. Cervical & Neck Pain. 3nded. Philadelphia : FA Davis Co. 1981.

De wolf A.N.. Onderzoek & Behandeling van weke delen :Bohn Staflen van Loghum Housten. Holland. 1994.

ILO. Eigonomic Check point Practical and Easy to Implement Solution forr Jmping safety Health and Working Condition. Geneva. 1 996.

Kisner C.. ThrapeuticExercize Foundations and Techniques. third edition. F.A. Davis company. Philadelphia. 1990

Kuntono H.P.. ManagementNyeri Muskuloskeletal. Temu Ilmiah Tahunan Fisioterapi XV. Semarang. 2000.

La Dou J.. Occupational Medicine. Appleton & Lange. California. 1990.

Mancini RM.. Muskuloskeletal Pain in : Halstead LS. Grabois M eds. Medical Rehabilitation. New York. Raven Press. 1995.

MH Pope. Review of studies on Seated Whole Body Vibration & Neuromuscular Pan, Departement of Environmental and occupational Medicine, University of Aberdeen. Scotland. UK. 1999.

Suma’mur, Ergonomi untuk Produktivitas Kerja, . CV Haji Mas Agung. Jakarta. 1995.



READ MORE - ASPEK FISIOTERAPI SYNDROMA NYERI BAHU

Tuesday, January 27, 2009

Innovation in prosthetics and orthotics

HE KNUD JANSEN LECTURE

COPENHAGEN 1986

Innovation in prosthetics and orthotics

J. FOORT

Medical Engineering Resource Unit, University of British Columbia

All correspondence to be addressed to Mr. J. Foort, Medical Engineering Resource Unit, University of British

Columbia, Shaughnessy Hospital, 4500 Oak Street, Vancouver, B.C. V6H 3N1, Canada.

Introduction

As I look back over my 35 years in the field of prosthetics and orthotics research, and

consider those years from the point of view of the innovations I have witnessed and

participated in, certain insights and influences stand out. They cluster around specific people

and projects. Two years in Toronto with Fred Hampton and Colin McLaurin led to the

establishment of the Canadian Plastic Syme's Prosthesis, the Canadian Hip Disarticulation

Prosthesis, plastic reinforcement of wooden prostheses and conception of the SACH Foot.
The products of ten years at Berkeley with Chuck Radcliffe, Leigh Wilson, Bill Hoskinson,

Frank Todd, Jim McKinnon and others, included design of the SACH Foot, the Quadrilateral

above-knee (A.K.) socket, the Patellar Tendon Bearing below-knee (B.K.) prosthesis;

conception of socket standardization, studies of prosthesis alignment and experiences with

modular prosthetics.

Introduction of modular prosthetics to the clinic, development of the electrical alignment unit,

use of semiflexible sockets and work on standard sockets and standard cosmetic restorations

were experiences of my 8 years in Winnipeg with lan Cochrane, Doug Hobson and Reinhard

Daher.

Invention of Shapeable Matrices, development of Tubular orthotics, development of

Computer Aided Socket Design and design of the valgus varus resist knee orthosis are

milestones of my Vancouver experiences with colleagues Steve Cousins, Richard Hannah,

David Cooper, Carl Saunders and Margaret Bannon over the past 15 years.

I have appreciated experiences in projects outside my work environment too. The most recent

was the cooperation that developed around Computer Aided Socket Design and Computer

Aided Manufacturing between the group at UBC and the groups at University College

London and West Park Research, Toronto. I am pleased that cooperation is being extended by

new initiatives developing between the original groups and others. I speak of these things to

convey to you the team basis for developments and the positive effect cooperation between

people has on advances in our field.

Those of us who have worked together on various projects functioned best when we

recognized and used each others qualities. Among the qualities I am thinking of are drive,

curiosity, imagination, persistence, patience, trust, confidence and the ability to share.

To keep sweet reasonableness alive between people, participants have had to review their

motives and consider the needs of their associates. How these associates functioned varied.

Some were definite and decisive. Some pondered things over and came to considered views.

Some were very competent at the things they were trained to do. Some inspired new ideas on

1

how to solve the problems we worked on. Some were able to take risks easily.

Assertiveness born of clarity of view could sometimes be mistaken for arrogance.

While human relations are never without their problems, all of these people enlarged my

capabilities and enriched my work life.

There have been things I loved doing. Other things I have compelled myself to do. My

attachment has been to what I believe were keystone projects, projects that had the potential

to generate multiple solutions. Inaddition, they were projects that suited my natural rhythms,

abilities and needs, and were championed by colleagues who could fill the gaps in my own

abilities. For the most part, the means used to solve problems were traditional engineering

coupled to vigorous artisanship. A great deal of self education was involved.

Now we are at a new intersection of events. Many of the problems have been defined but new

means for problem solving are at hand. Although engineering and artisan skills are still

required, there is a need to reassess our methods in light of the new means so that smooth and

effective advances can be made. Re-education and new education are involved.

Factors affecting innovation, on the other hand, will not change. Some already alluded to are:

1. A suitable field for inventing.

2. Colleagues who cooperate, lead and support.

3. A mix of skills and temperaments in the team.

4. People willing to take risks.

5. An environment conducive to study and experimentation.

6. A speculative attitude.

7. Tools and techniques for problem solving.

A willingness to reassess methods and means periodically.

8.

9. Appreciation of accumulated skills and knowledge.

In order to develop the theme of innovation in prosthetics and orthotics, I will use a review of

the problem of shaping structures that fit against the body for control of forces and

movements. Although the emphasis will be prosthetic, the problem is common to both

prosthetics and orthotics.

I have organized the presentation around eight propositions which have a bearing on shape

management. Factors I have observed as conducive to innovation are interspersed among

them.

First proposition: Tissue density is non-homogeneous (1955)

Clinical studies of the quadrilateral socket for trans femoral amputees taught us that the

residuum cannot be treated as a homogeneous mass. I believe that an examination of

derivation of this proposition in relation to design of the

quadrilateral socket will help us to identify some factors associated with innovation and

indicate the need for further innovation.

The quadrilateral socket

The quadrilateral socket for AK amputees was brought to the Biomechanics Laboratory,

University of California, USA from Germany by Eberhart and his team in 1949. It was

assumed to be a suitable solution to prosthetic socket design for the above-knee amputee.

The plan was to examine its characteristics and to test it clinically at the Laboratory. It was

studied throughout the 1950s for rational factors that could" help to define it. Simultaneously,

2

suction suspension was used, a factor that imposed greater demands on socket design, thereby

highlighting problems with the quadrilateral socket.

Difficulties:

Common difficulties encountered included (a) cysts on the residual limbs in areas contacting

the medial and anterior brims; (b) formation of horny nodules, or keratin plugs in the ischial-

gluteal weight-bearing regions and (c) distal residuum oedema.

Shear forces on tissues where they extended over socket edges were identified as contributing

to cyst formation. Oedema was due to proximal wedging effects and to insufficient support of

distal tissues. Nodules, or keratin plugs, were traced to high compressive forces which drove

small corns inward, building them into pain-producing nail-like structures.

It was assumed by Radcliffe that if the ischium was stabilized on the seat of the quadrilateral

socket by means of more positive anterior forces, these difficulties would be overcome. To

achieve this, he proposed that soft tissues over Scarpa's Triangle be compressed more

positively as compared to harder muscular regions laterally. This led to the inward bulge over

Scarpa's Triangle characteristic of present day quadrilateral sockets.

The differential displacement of tissues to effect even loading on the front of the residuum

was a new idea that could be applied to any part of the body for force transfer and movement

control.

In order to convey the requirements, he depicted the concept in biomechanical terms that

practitioners might understand. Thereafterit became common practice to illustrate

biomechanical events in this way, encouraging a more systematic analysis of fit and

alignment. Innovative factors illustrated in this include:

10. A person able to derive and champion a new concept.

11. Use of engineering principles for socket design.

12. Confident application of the hypothesized solution.

13. Using a clinical environment for testing it.

The solution helped to reduce the incidence of cysts, keratin plugs and oedema when applied

to clinical study amputees.

Practitioners trying to follow the clinical study procedures however, found the information

difficult to interpret because it was essentially descriptive. Their difficulties were thought to

be due to their failure to abide by the principles. Measurements were made of successful and

unsuccessful sockets in order to identify differences that might be responsible. From these

might come a more definitive set of instructions for socket design. It was soon apparent

however that the dimensions being measured could be the same for sockets that were

obviously different. At the same time, successful sockets were observed to appear very

similar to one another. This led Bill Hoskinson and I to speculate that it might be possible to

standardize quadrilateral sockets.

This is the next proposition:

Second proposition: Socket shapes can be standardized (1957)

Calculations based on hazy ideas and gross assumptions to test the hypothesis that

quadrilateral sockets could be standardized indicated that it might require approximately

11,000 one piece AK sockets (5,500 for each side of the body) to provide the range of sizes

needed for a system that could be used with no more than small shape adjustments.

At that time, with no computers, storage, selection and distribution would be major problems

in practical application.

3

To arrive at a more favourable format, the hypothetical socket was divided into sections.

Attention finally focussed on the brim area alone. If the brims were one-piece, only 150

would be required for each side of the body. If all four sides of each brim were adjustable, the

number

of brims required could be reduced to 3 for each side of the body.

The innovative impulse in this can be seen to follow out of:

14. A problem in strong focus.

15. The search for objective data.

16. A willingness to make assumptions in the absence of facts.

17. A practical objective.

The results of this hypothesis included:

a) establishment of jigs for fitting quadrilateral sockets, notably the Berkeley Adjustable

Brims,

b) prefabricated temporary sockets,

c) adjustable sockets for the study of socket design parameters.

The jig fitting method facilitated acceptance of quadrilateral sockets by making the design

principles more obvious and the design methods more simple.

Factors that influenced acceptance of jig fitting methods included:

a) the desire for total contact sockets, which could be made easily by this method

c) difficulties experienced in defining the quadrilateral socket shape,

c) the desire to substitute plastic laminates for wood in socket construction, a feature of the

brim fitting method.

In this we see how:

18. Converging ideas and overlapping experiences bring innovation to focus.

19. Simplification of methods enhances acceptance.

In spite of these meaningful consequences, the hypothesis on standardization received a

hostile response in general. I doubt if many of you will appreciate how heretical it was during

the 1960s (and perhaps still is) to suggest that sockets can be standardized. I remember

sending a paper based on standardization to an American journal approximately 20 years ago.

The provocative title was "Instant Prostheses for Thigh Level Amputees." The editors reply

was that there was no space for the article in the journal at the time, and it could not be

foreseen that there ever would be! My comment is this:

20. Negative attitudes toward innovations can either hamper their development or

prolong their demise!

While I consider the proposition on socket standardization valid, it may be that every

successful shape will be computer banked and standardization will be bypassed. Banking all

shapes overcomes obstacles to acceptance of standardization which include:

a) the shape preferences and prejudices that people hold,

b) concern for the population that might be excluded from coverage (i.e. congenital

amputees),

c) the lack of objective data.

Adjustable sockets constructed to study design parameters gave information on sensitivity of

residual limbs to changes in socket dimensions (1962). There is a need to continue this work

4

in the light of what we now know and need to know.

The adjustable sockets were suggestive of socket modularization, but did not lead to it. New

fabrication techniques, an appreciation of the value of socket flexibility as exemplified in the

Icelandic Socket and modular shapes in computer aided socket design systems may foster

socket modularization.

Data for design could be derived from computer banked shapes and this in turn could lead to

the impedance matching of sockets to residual limbs proposed by Ben Wilson and Eugene

Murphy once the required data on tissue qualities is available.

Without objective data on tissue qualities to use in design work, modularization will require

that intelligent, workable assumptions be made. Following out of that, however, adjustable

modular sockets could help refine these assumptions and ultimately be the basis for defining

tissue qualities. Finally, with sufficient data available, standardization could be reconsidered.

The computer would be used for shape storage and numerically controlled machines for

production of the shapes.

I can add other innovation factors:

21. Advances may reduce the need for information, reduce its importance, or

facilitate its acquisition.

22. New options precipitate new speculations.

23. Oscillation between various options indicates that we have insufficient data.

So far, I have indicated how the North American version of the quadrilateral socket evolved

out of the original German design through clinical studies and how these

developments established propositions which I now summarize:

(1) Residual limb tissue density is variable.

(2) Socket shapes can be standardized An appreciation of the role of the skeletal frame in

determining the shape of the quadrilateral socket led to the third proposition.

Third proposition: The bony frame is the basis for socket design (1965)

For example, the triangle defined by the tendon of adductor longus, the ischial tuberosity and

the trochanter is the bony frame round which the proximal shape of the AK socket is

designed. Deviations from the triangular shape come about because of the need to

accommodate the tissue-muscle masses adjacent to the sides of the triangle in a

biomechanically compatible way.

The facts of this are most clearly exemplified in sockets derived from hand cast impressions.

Lean residual limbs tend to give a shape that resembles the plug fit type of socket. Heavily

tissued residual limbs yield a more quadrilateral shape.

This proposition explains deviations from stereotyped socket shapes for any level of

amputation. It can be taken into account in standardizing shapes and in adapting standard

shapes for shape customization in the computer. It is relevant also in making biomechanical

shapes from sensed topographical data. It indicates:

a) why there are limitations in the Berkeley jig fitting method, which utilizes jigs of a single

standard form,

b) limitations of standard sockets currently used,

c) what might be done to improve the biomechanical result,

d) why computer aided socket design programs include means for customizing the standard

reference shape

e) why reference shape processing of bone geometry is significant for socket design

f) and why we need information on tissue qualities.

5

The patellar-tendon-bearing BK prosthesis

In my opinion, development of the PTB prosthesis is a good model for this discussion of

innovation in prosthetics and orthotics. I will stress the process rather than design in order

toemphasize the mechanism of study and motivating factors involved.

Up until the late 1950's at Berkeley, so much time and effort had gone into development of

AK prosthetics that there was an uneasy feeling that BK prosthetics had been neglected.

To deal with this, Radcliffe called together a group of knowledgeable practitioners and

educators to lay out a plan of attack on BK prosthetics with the researchers. It was agreed that

in the studies the researchers would systematize prosthesis design and the educators would

disseminate the information. They would also help format the information to be disseminated.

The Veterans Administration would require prosthetists to take the courses as a condition for

servicing VA clients.

This was a very potent format — one I would recommend for solving other problems, one 1

wish was being followed in the development and dissemination of CAD/CAM for prosthetics

and orthotics.

No formal evaluation component was included. Each group made its contribution. That which

would normally be done by evaluators was done directly by the prosthetists who applied the

system. In retrospect, I would say that it was a satisfactory way to do it. In fact, considering

the rate at which knowledge and means now develop, existing scenarios for evaluation seem

more like seaweed around the propeller than a jib full of wind.

I will make another comment. The fascination with statistics on the part of our major funding

agency, Health and Welfare Canada, is restricting Canadian prosthetics and orthotics

research. In Berkeley, and elsewhere where innovations have advanced our field to a

remarkable degree, the sample sizes used in the studies were sub-statistical. Results leading

to commitment to adopt the PTB prosthesis rested on multiple fittings on no more than a

dozen amputees, each different in various ways.

The results were not expressed objectively so much as procedurally. We knew that our

methods were better than existing ones, a fact confirmed by the rate of dissemination and

application of the new information.

Competent judgement was substituted for evaluation — and I would add, at no loss.

The PTB prosthesis was essentially assembled from information modules.

A modified form of the German practice of using the patellar tendon as a weight-bearing

surface introduced at the original workshop, was adopted. Total contact was already

acceptable at the research level in socket design tor oedema control and was adopted for use

in the BK system. At the same time, Shindler's technique for making Kemblo inserts to line

sockets made of hard blocked leather set in wood was adopted. Blocked leather and wood for

the socket were replaced by plastic laminates. The SACH foot, now entering clinical

application, was incorporated.

Simultaneously, Blevins was making prostheses which he suspended by means of multiple

socks with rubber buns stuffed between them and a knee strap. Galdick in San Francisco was

making BK prostheses suspended by suction. Woodall was trying condylar suspension by

1962.

This gives you an idea of the many influences at work to give rise to the PTB prosthesis and

to stimulate innovation. Much of this information was present in the field but unintegrated.

Summarizing,

24. Innovation is enhanced by coordinated efforts based on shared motives.

25. Informed judgement can be equivalent to evaluation.

6

26. Information density affects innovation.

27. Accomplishments in one area affect events in another.

28. Practical hypotheses are quickly accepted.

29. Accident also plays a part.

Alignment of trial prostheses at the biomechanics laboratory during checkout of procedures

outlined by the review group was done in two steps. The socket-foot complex was aligned

without the side joint and corset system in place, and then, upon completion of dynamic

alignment of the foot-socket complex, the joint and corset system was added and aligned.

At that time, it was considered hazardous for an amputee to walk for prolonged periods on a

prosthesis without the corset and side joints in place to protect the knee. No explanation was

given as to why some people were able to wear jointless Muley prostheses. When one of our

test amputees rebelled at having the corset-joint system added to his prosthesis following

successful trials without, the switch was made to what is now the PTB below-knee prosthesis.

Controversy surrounded the PTB initially. Concerns remained that the knee would be

damaged. Some critics said that only a few people could be successful PTB users, the

majority would require side joints and corset.

Examination of the role of alignment on forces at the knee and application of normal

locomotion data led researchers to abandon the myth against jointless prostheses and led to

emphasizing the flexed knee gait as an insurance against knee damage.

Factors pertinent to success of the PTB prosthesis seem to have been:

a) a better understanding of how to shape and construct a socket;

b) a better appreciation of the biomechanics of the prosthesis as exemplified by the

improved definition of alignment;

c) relating fundamental gait data to the practical situation;

d) the experiences of successful wearers of Muley prostheses,

e) development of the SACH foot;

f) a switch to new prosthesis construction methods;

g) significant simplification of the BK system.

Factors favouring innovation were;

30. The existence of the "Muley" type of prosthesis.

31. Available fundamental information on locomotion.

32. An engineering-artisan approach to solving the problem.

33. Cooperative effort directed toward its implementation.

34. Including the amputees on the team.

35. Using accumulated information.

With regard to the last spur to innovation, I would comment that technologists who are about

to do fundamental design work for the production of orthopaedic shoes using computer aided

design methods would be wise to take into account what the practitioners can teach them!

Much of the information that designers will need resides in the shoe lasts and methods of

measurement and last modification used by the practitioners.

Innovations spawned by development of the PTB prosthesis included the air cushion socket,

adjustable sockets, transparent sockets, adjustable spring loaded end-bearing sockets, sockets

fabricated directly on residual limbs, foam-in-place end pads, suspension from the patellar

and femoral condyles and inflatable bladders in sockets.

36. New innovations spawn innovation of variants.

7

Modular prosthetics

During the 1960s, a major problem, and still a problem to quite an extent in North American

prosthetics, was the degree of immutability in prostheses. When there were difficulties, the

socket was usually the problem. To replace the socket required major modifications to the

prosthesis, even replacement of the entire prosthesis.

In experimental modular-like prostheses however, the option for quick exchange of

components existed.

The need and the obvious solution led to the next proposition:

Fourth proposition: Modular structures optimize prosthetic management (1955 — )

The modular-like designs in the research laboratories that foreshadowed modern modular

systems did not seem attractive to prosthetists; the Northwestern University BK pylon with

alignment and length adjustability built-in and the University of California Polycentric Knee

for above-knee amputees are examples.

It was apparent that a comprehensive modular system that overcame whatever obstacles were

inhibiting development was needed if the potential advantages were to be exploited. This

realisation influenced me to adopt modular prosthetics for clinical use when I went to

Winnipeg, Manitoba in 1963. My conviction was that modularizing prosthetics would speed

up access of amputees to prosthetic care. It would also help people learn prosthetic practices

and would lead to economies.

The emphasis in Winnipeg was on physical rehabilitation in a newly established hospital

designed for that purpose. However, the prosthetics clinic was bogged down in wooden leg

making practices of the times. Geographic isolation and absence of modern technical

resources in prosthetics inhibited change.

I came as an expert. What I proposed for clinical application in fact was experimental. I had

worked in an environment linked to innovating and wished to bring the attitudes associated

with innovating into the clinic. The aim was to have a comprehensive and adaptable modular

system that included as many prefabricated elements as possible. The system would be used

to manage patients with any level of amputation through their full spectrum of care from

immediately post surgery to return to community life.

The design process would be evolutionary with the designed system used for what it was

good for at every stage of development. A system with the least number of parts would be

designed and common parts and tools would be used as far as possible.

A key feature would be rapid assembly-disassembly and reassembly for quick adjustment and

socket exchange.

Only a few basic elements had to be designed to manage BK, AK and HD prostheses. All

other parts were available or could be adapted.

We tried to make the system suit a basically rural environment so that a person who was

distant from services might be able to manage repairs using community resources, including

the local hardware store.

This experience illustrates:

37. Integrating what exists in new ways is innovating.

38. Experimentation can be a part of a service system.

39. Problems can be tackled from the users point of view.

The risks that might be involved in adopting a modular system for clinical use seemed small

compared to the advantages to be gained in overcoming the bottlenecks affecting amputee

8

rehabilitation.

Results were positive. No amputee had to postpone rehabilitation because of the prosthesis.

In fact, it became common for a training prosthesis to be delivered on the day prescribed.

The evolutionary design approach allowed defects in design to be overcome as a means of

extending usefulness of the system while it was used for what it would permit. At first, the

objective was to keep people walking until the definitive prostheses were delivered. Stage by

stage, the system was improved until finally it could be used definitively.

Evaluation proceeded in tandem with design. This circumvented the possibility of

incorporating unsatisfactory features into the final design. In my view reaching objectives in

this manner must be one option to consider in the interest of economizing on time, costs and

effort (I must admit that I would always choose this approach).

Shaped components were a source of problems, especially with the BK amputees. Although

standard cosmetic covers had been designed, and also standard socket receptacles to link the

sockets to distal components, the sockets themselves were all custom made. This was

reasonable for definitive prostheses, but training prostheses require frequent socket changes.

Successes with the AK prefabricated sockets motivated us to develop prefabricated BK

sockets in response to the bottleneck experienced.

Nineteen sockets were made for each side of the body.

Use of these sockets taught us that five sizes for each side of the body were sufficient to fit all

of the new amputees managed in this way and that one size alone met 50% of the needs. This

illustrates other factors in innovating:

40. Previously successful patterns are followed.

41. Every experience is treated as an information source.

We were acutely aware of limitations imposed by standardization. Standardizing can mean

that someone is left out unless the standardized item is adaptable. Such implications for the

client need to be kept clearly in mind during innovating. That is:

42. A sense of responsibility must influence what is done.

Shape sensing

At that time, obtaining limb shapes by means of a shape sensing method, subject of the next

proposition, seemed like a possible solution to the limitations imposed by standardizing.

Fifth proposition: Shape sensing gives data for interface design (1961)

When the idea of automating shape management for the fitting of sockets and cosmetic

restorations was first raised in 1960, there was no sympathy for it at Berkeley. In fact there

was strong scepticism toward it in the research community when I raised it as a proposal at a

meeting of the Subcommittee on Socket Design of CPRD in 1965. Although I was chairman

of the subcommittee, the proposition did not even win a place in the minutes.

43. An innovative idea in its first stages is fragile.

I had discussed shape management by automated means in a letter to Colin McLaurin in June

1961. In practical terms, Frank Todd and I constructed a left side shank model from a right

side shank model by means of photographic silhouetting in 1962 and that was all that was

attempted until I returned to the idea in 1969.

When the gap between conception and initiation of work is considered, one can appreciate

9

that:

44. Innovators must be patient and persistent.

45. A concept has to be suited to its times for acceptance.

Our first formal attempt to sense shape for prosthetic applications involved use of the shadow

moire phenomenon. These studies spanned the period 1972 to 1980. A prosthesis replicated

in Vancouver, using the moire technique for sensing the shape and a numerical controlled

carver for producing the models, was worn by the recipient for three years.

We were introduced to the shadow moire technique by Dr. Duncan, then Head of Mechanical

Engineering at UBC. He was actively engaged in shape processing for ocean bottom survey,

boat hull design and machine design purposes.

Using a system that he had built to obtain multiple view photographic contour maps around

objects, Steve Cousins and I produced a number of maps and models of residual and intact

limbs.

On the basis of this work, Tony Staros established a contract with us to quantify shoe last

shapes for the USA Veterans Administration, a forward looking project which we completed

in December 1980.

We set up design criteria and had fabricated on principles demonstrated by Dr. Vickers and

Doug Dean at UBC Mechanical Engineering Department, a machine that gave a single

continuous moire shoe last map.

Saunders forced the system to work by putting the data into the computer point by point. He

soon appreciated that quick input of data was necessary if sensing was to be a part of

automating prosthetic procedures.

In later studies of what was being done in Japan where considerable expertise in shape

processing had developed, he identified the flying spot technique as significant. It offered

direct, rapid deposit of data into the computer at an affordable cost.

These experiences taught us to:

46. Look outside our field for information.

47. Go for information where the information density is greatest.

The light streak technique has been adopted at West Park Research Centre, Toronto, Canada,

where, by agreement between us, sensing shape has become a central project while we

concentrate on manipulating shape.

Because sensed shape is topographical, it must be used in conjunction with tissue quality data

or be subjected to manipulation to derive the required biomechanical shape. This weakness in

topographic mapping methods for derivation of biomechanical shapes has yet to be

overcome.

On the other hand, biomechanical data are inherent in standard shapes and this fact can be the

basis for deriving custom shapes. I proposed this concept first during the 1SPO course in AK

prosthetics held here in Denmark in 1978. (You may recall, that in Winnipeg 50% of new BK

amputees were found to fit into a single standard socket size).

This leads us to the general hypothesis of the next proposition.

Sixth proposition: The shapes of all examples of any given anatomical feature or its

biomechanically matched representation are sufficiently similar to permit shape

matching on a mathematical basis using a standard shape as the reference (1978) and

Strathclyde Paper #1, 1984.

That is, you can make a standard shape bigger, make it smaller, make it longer or shorter,

10

make it differentially flatter or deeper in any direction and add or subtract from a particular

point any required amount starting with a preconceived shape that serves as a

biomechanically relevant core or reference shape.

My UBC colleagues have designed the current CASD (Computer Aided Socket Design)

system on the basis of this proposition. Colleague Dave Cooper has extended its application

to derive the shape of bones in vivo using external bony landmark measurements.

The hypothesis stems from attempts to standardize sockets and from attempts to adapt sensed

shapes to socket design.

The hypothesis does not discount the significance of shape sensing. Shape sensing can be

used:

a) to deposit shapes in the computer for further processing; and

b) for defining how a shape should be processed.

Reference shape modelling has elegance. It can be used for internal as well as external

anatomical structures and has no adverse effects on the person for whom the shape is being

developed. It can be used for other than anatomical features. It can be used in conjunction

with other techniques, such as shape sensing. It is, in fact, a concept of general significance.

The next gap to leap is that of constructing the interface with a degree of elegance

comparable to that offered for designing it.

This leads to the next proposition:

Seventh proposition: Shapeable matrices can be used to construct biomechanical

structures directly (1977)

A shapeable matrix is a structure made up of nodes and links in a format that permits it to be

contoured to match a required shape. You may liken it to a flexible lattice that can be made

rigid once shaped and be returned to flexibility for re-shaping.

The new emphasis could be on structures that can be assembled in the shape format required

and remain amendable for post fitting adjustment. The seating systems developed at the

Bioengineering Centre University College London and at MERU are the only examples of

shapeable matrices so far.

Design of shapeable matrices grew out of brainstorming sessions led by Steve Cousins when

he worked with the team at the Medical Engineering Resource Unit, Vancouver in 1977.

With advent of the Shapeable Matrix, shape management is targeted from two directions:

a) On the one hand, computer graphic techniques for shape management can be used

to define the shape.

b) On the other, mechanical matrices can be used to build up the shaped structures directly.

Yet to be achieved is the mating of computer and matrix to allow configuration of the matrix

by computer.

The aim should be to develop universal matrix building blocks from which any shape can be

constructed. This may lead to modularization of interfaces, or modularization may

circumvent development of matrices. If the matrix approach is circumvented, there may be

some gains but there will also be losses. The matrix approach is much more fundamental

even though design is difficult. Hybrid modular-matrix systems, as proposed by Cousins,

may develop as stepping stones to either matrix or modular structures.

This illustrates other factors in innovating:

11

47. The path to choose is the more fundamental one if an innovation is to be far

reaching.

48. Concepts can be combined.

Difficulties experienced with hand assembly and adjustment of miniature shapeable matrices

which we have attempted to design for direct use against the body have led us to the eighth

proposition:

Eighth proposition: Shape dependent components will be produced by robot

constructors

To produce sockets directly by computer controlled robots, while difficult, would set the

stage for a manufacturing method that precludes the need for moulds. Such an approach is

infinitely compatible with computer aided design.

It is also compatible with the needs in prosthetics and orthotics which are now so heavily

dependent on custom made moulds for production of shape determined components.

This view is shared by our colleagues in Toronto at the West Park Research Center where it

is proposed to use a robot constructor to make seats.

The dream is that CAD and CAM will become so intimately meshed that the design and

fabrication of shaped objects will proceed simultaneously. Also, it will be possible to have

raw material managed in a way that will deliver an interface that varies in stiffness according

to the way in which materials are delivered from the nozzles held by the robot constructor.

Establishment of computer controlled robot constructors would be as revolutionary in

production technology as was the introduction of mass production.

Intermediate steps might include (a) the design of programmable moulds, or (b) design of

matrix elements that can be assembled by computer controlled robots.

When all of this is put together, we can say:

a) Biomechanical shape is determined by bone geometry and tissue quality.

b) Biomechanical shapes can be standardized.

c) Standard shapes can be customized.

d) Shape sensing can capture and classify shapes.

e) Interfaces can be constructed from matrices.

f) Matrices can be constructed by robots.

You may well consider the long and arduous course of actions bringing us to these

possibilities. We can mesh them easily on the basis of hindsight. What step could have been

omitted, what influences of colleagues on one another done without?

The adoption of matrices, computers, shape sensing, internal and external reference shapes

and robot constructors is equivalent to a new date zero for design of shaped components for

use in prosthetics, orthotics, and orthopaedics. We come to this as a consequence of the

technology that surrounds us or can be envisioned on the basis of what surrounds us. We

have merely to take note of it, reassess our problems in the light of it and act innovatively.

An important principle to guide us is to derive solutions that have wide-spread uses. This will

help make what we design available to the disabled population. Matrices are like this. They

could dim the boundary between prosthetics and orthotics and the boundary between disabled

and able bodied persons. Computer aided design already does this. Robotic constructors are

likely to have the same affect. I urge you to this — aim for universal solutions.

12

Epilogue

I have tried to show how, starting with limited information, some propositions that foster

solution of difficult problems have come into

focus. The time and effort and innovative skills of many people, some unknown, have been

involved. That there are such people with the time and resources to solve problems is a prime

requirement. They need to be in environments that are conducive to original thinking.

Persons within or between groups need to be linked to permit complementary problem

solving paths to develop. Innovating is not the province of a person or a group but is a flower

that grows out of the human garden.

Innovative impulses need to influence not only what and how we design, but how we

organize to do so. The need for cooperation and joint involvement in large projects is

growing. Fortunately, the technical means are available to foster this. Seemingly separate

entities such as standardizing shapes, designing modular systems, sensing shape,

manipulating shape, transmitting shapes over the telephone, designing matrices and

constructing custom shapes by robots coalesce as lively possibilities for automation of design

and production of shaped components for prostheses, orthoses and orthopaedic footwear.

I cannot help but wonder how all of these things might have fared had they been part of an

overall strategy fostered by cooperation of all of us engaged in prosthetics/orthotics research

over the past few decades.

The necessity is for designers to overcome indifference to colleagues, mistrust, greed and

jealousy so that field-adoption of comprehensive systems that can develop from joint efforts

will be realized.

I personally feel that copyrighting and patenting are impediments to the free flow of

information. Researchers would not be corrupted by the impulse to protect what they

innovate in order to derive gain if the social means were available for the work they wish to

do. The political problem is to foster mechanisms by which such programmes can be funded

and the benefits be directly applied where the needs exist.

As I see it, we must be free of attitudes that keep us bound to our particular institutions. We

must discount nationalism and ideologies to become truly conscious of our roles in relation to

the world's people. Every person in our field plays some part in this. Manufacturers do when

they make quality the factor of significance intheir competition. Designers do when they

encourage the best things to be used by the various participants in the rehabilitation field

regardless of origins. Practitioners do when they stay informed and use what is best in the

developing armamentarium. Educators do by trying new things, selecting the best and

disseminating information about them. Funding agencies do when they are sensitive to grass

roots inputs that identify appropriate objectives for research in support of services. Politicians

do when they transcend political boundaries in response to world-wide needs.

These are the sorts of ideals that thoughtful men have brought to us down through the years.

An innovative approach to their implementation is to be encouraged.

ISPO is the means by which we keep in touch with each other for furtherance of our common

interests. They are the sorts of interests Knud Jensen held for ISPO which he saw as an

important element in the evolution of a brotherhood dedicated to the well-being of physically

disabled people throughout the world.

13

I appreciate the chance I have had to outline a course of events that illustrates the innovative

process, to give you these thoughts through the Knud Jensen lecture and to wish you an

inspiring 5th World Congress of the ISPO.

14


READ MORE - Innovation in prosthetics and orthotics

Popular Posts